Filter
Top Products
51
Input channel operations
Input channel operations
1.
Access the NAME EDIT popup for the desired channel.
fig.ScrChNameEdit.eps
2.
Move the cursor to the CATEGORY list in the TEMPLATE
area, and select the category of the name you want to
enter.
3.
Move the cursor to the NAME list in the TEMPLATE area,
and select the name that you want to enter.
4.
Press [F1 (Recall Template)].
The selected name will be entered in the name edit field.
5.
Move the cursor to the name edit field, and you’ll be able
to edit the name that was entered.
6.
Press [F8 (CLOSE)] to close the popup.
If you enter a name from the template, the name that was
previously in the name edit field will be deleted.
Channel settings can be copied to another channel. Channel
copying is done in the CHANNEL COPY popup.
1.
Access the CHANNEL COPY popup for the desired copy-
source channel.
fig.ScrChDisp.eps
2.
Press [F3 (COPY)] to access the CHANNEL COPY popup.
fig.ScrChCopyGuide.eps
Copy-source channel
This indicates the copy-source channel.
Copy parameter select buttons
Here you can select the parameters that will be copied. You
can select the following parameters:
Copy-destination channel select buttons
Here you can select the copy-destination channel(s).
The function buttons have the following operations:
3.
Move the cursor to the desired copy parameter select
button, and press [ENTER] to select it.
4.
Move the cursor to the desired copy-destination channel
select button, and press [ENTER] to select it. You can
select more than one channel.
Using the template to enter a channel
name
Copying channel settings to
another channel
Patch
Input patching
Phase Phase
ATT Attenuator
HPF HPF (high-pass filter)
Gate Gate/expander
Comp Compressor
EQ 4-band EQ
Fader Fader
Pan Pan
LCR LCR button, CENTER
Send AUX/MTX sends
Direct Direct out point
Group DCA groups and MUTE groups
To MAIN MAIN button, LR button, C button
[F3 (PASTE)] Executes the copy.
[F8 (CLOSE)] Closes the popup.
2
1
3
1
2
3
M-300_e.book 51 ページ ２０１０年６月２４日 木曜日 午後２時２６分