Filter
Top Products
110
Mute groups
Mute groups
Mute grouping is a function that lets you control the mute status
of multiple channels belonging to a mute group. A channel can
belong to more than one mute group.
The MUTE GROUP screen is used to make mute group settings.
1.
In the GROUP section, press [MUTE].
ffig.ScrMUTEGroupGuide.eps
The MUTE GROUP screen will appear.
MUTE group 1–4 button
These buttons turn mute groups 1–4 on/off. When you turn
on a mute group, the channels belonging to that group will
be muted.
You can also make the setting for switching MUTE groups on or
off from a USER button (p. 136).
The function buttons have the following operations:
Output muting controlled by [F6 (MUTE ALL OUT)] cannot be
stored in a scene memory. When the M-300 is started up,
muting caused by [F6 (MUTE ALL OUT)] will be turned off.
The MUTE GROUP ASSIGN popup is used to assign a channel to a
mute group.
You can also use the GROUP ASSIGN popup of the CHANNEL
DISPLAY screen to assign a channel to a mute group. For details,
refer to “Assigning a channel to a MUTE group” (p. 53).
1.
In the GROUP section, press [MUTE] to access the MUTE
GROUP screen.
fig.ScrMUTEGroup.eps
2.
Move the cursor to the MUTE group button of the desired
mute group, and press [F8 (ASSIGN)].
fig.ScrMUTEGroupAssignGuide.eps
The MUTE GROUP ASSIGN popup will appear.
Target mute group indication
This indicates the mute group to which the settings in the
MUTE GROUP ASSIGN popup will apply.
Channel select buttons
Here you can select the channels that will be assigned to the
mute group.
The function buttons have the following operations:
About mute groups
Accessing the MUTE GROUP screen
[F1 (MUTE1)]–
[F4 (MUTE4)]
Turns MUTE group 1–4 on/off.
[F6 (MUTE
ALL OUT)]
Mutes all outputs of the M-300 and input/
output units.
[F7 (NAME EDIT)] Accesses the NAME EDIT popup (p. 111).
[F8 (ASSIGN)] Accesses the MUTE GROUP ASSIGN popup.
1
1
Assigning a channel to a mute
group
[F1 (CH 1–32)]
Displays CH1–32 as the channel select buttons.
[F2 (AUX/MTX/MAIN)] Displays AUX1–8, MTX1–4, and MAIN L/R/C as
the channel select buttons.
[F8 (CLOSE)] Closes the popup.
2
1
1
2
M-300_e.book 110 ページ ２０１０年６月２４日 木曜日 午後２時２６分