Filter
Top Products
187
Management of the M-48 live personal mixer
Management of the M-48 live personal mixer
Saving/loading USB memory
This loads or stores all data saved in M-48 units as M-48 project
files on USB memory.
1.
Access the M-48 MANAGER popup.
fig.ScrM48Manager.eps
2.
Press [F5 (LOAD/SAVE)].
ffig.ScrM48LoaSave_Guide.eps
The M-48 LOAD/SAVE popup will appear.
Target unit list
This list shows the M-48 units to which the load or save
operation will apply.
The list shows the following items:
Project file list
This lists the M-48 project files that have been saved to USB
memory. You can specify the save-destination folder for the
project file, or specify the project file that you want to load.
The function buttons have the following operations:
1.
Access the M-48 LOAD/SAVE popup.
fig.ScrM48LoadSave.eps
2.
In the target unit list, select the M-48 unit whose project
you want to save.
If you want to save the projects for multiple M-48 units, press
[ENTER] to add or clear the check marks in the appropriate
MARK fields.
By pressing [F1 (MARK ALL)] or [F2 (CLEAR MARKS)] you can add
or clear the check marks in all MARK fields of the target unit list.
3.
In the project file list, move to the location in the folder
hierarchy in which you want to save the data.
By selecting a folder and pressing [ENTER], you can move
downward into that folder. By selecting “..” and pressing
[ENTER] you can move back to the folder above the current
one.
Pressing [F3 (MAKE FOLDER)] will create a new folder.
Accessing the M-48 LOAD/SAVE popup
Item
Explanation
MARK
Add check marks to this column if you want
to load or save data for multiple M-48 units.
Pressing [ENTER] will add or remove the
check mark.
NO. Indicates the number in the list.
UNIT NAME Indicates the unit name.
2
1
1
2
[F1 (MARK ALL)]
Adds a check mark to all MARK fields of the
target unit list.
[F2 (CLEAR MARKS)] Clears the check marks from all MARK fields of
the target unit list. This will be on if any MARK
fields are checked.
[F3 (MAKE FOLDER)] Creates a folder in the project file list.
[F4 (NAME EDIT)] Accesses the NAME EDIT popup where you can
edit the name of the file or folder.
[F5 (LOAD)] Loads the project file selected in the project file
list (p. 188).
[F6 (SAVE)] Saves the data of the target unit (p. 187).
[F7 (DELETE)] Deletes the selected file or folder from the
project file list (p. 189).
[F8 (CLOSE)] Closes the popup.
Saving an M-48 project to USB memory
M-300_e.book 187 ページ ２０１０年６月２４日 木曜日 午後２時２６分