Filter
Top Products
128
User settings
User settings
About user settings
Each user who uses the M-300 can have their own individual user
settings. These settings can be used according to the level of the
user to restrict the range of channels and parameters that can be
operated, and to customize the user buttons, user fader layers,
and preference settings to the user’s liking. User settings include
the following items:
User name
A name of up to eight characters.
Password
The password that will be required in order to use the user
settings.
User level
This setting specifies whether the user has privileges to
manage the M-300, and specifies the range of channels and
parameters that can be operated.
The privileges to manage the M-300 are called ADMIN
privileges.
User preferences
This includes user fader layers, user button, and other
preference settings.
There are three types of user settings as follows:
ADMIN
These are user settings of a user who manages the M-300.
The settings are stored in internal memory. There are no
limitations to operation; the GUEST user settings can be
edited and users can be created and edited. A password can
be specified.
GUEST
This user setting can be used by anyone. The settings are
stored in internal memory. The features available to the
GUEST are specified by an ADMIN user. A password cannot
be specified.
A user who can use user settings with ADMIN privileges is referred
to as an ADMIN user.
A GUEST cannot be given ADMIN privileges.
USER
These are user settings that an ADMIN user creates on USB
memory. A name of up to eight characters can be assigned.
The user level is specified by an ADMIN user. A password can
be specified.
Any user can make their own user preference settings.
Do not disconnect the USB memory or switch off the M-300’s
power while data is being saved to USB memory. Doing so
may destroy the data saved in USB memory.
On the M-300, one setting is in use at all times. The user setting is
remembered even when the power is turned off, and the same
user settings will be active the next time the power is turned on.
The user password will not be requested when the power is
turned on. If you want to ensure that the user settings are not
used by unauthorized persons, switch to GUEST before you turn
off the power.
In the default condition, the M-300 will start up with the ADMIN
settings without any password.
The USER screen is used to create and edit user settings.
User settings consist of the following two types of settings:
User level (p. 133)
This specifies whether the user has ADMIN privileges, and
specifies the range of channels and parameters that the user
is allowed to manipulate.
User preferences (p. 134)
These include user fader layers, user button, and other
preference settings.
Types of user settings
Creating and editing user
settings
Multiple USERs can be created on separate USB memory
devices so that the USB memory can be used as a physical
user authentication key, or multiple USERs can be created on
a single USB memory device, with passwords used to
authenticate users.
M-300_e.book 128 ページ ２０１０年６月２４日 木曜日 午後２時２６分