Filter
Top Products
78
Dynamics
Dynamics
Limiters are provided on each AUX1–8, MTX1–4, and MAIN L/R/C.
They attenuate the signal so that the output does not exceed the threshold level.
fig.LimCurve.eps
The LIMITER popup is used to perform limiter operations.
Limiter operations
INPUT LEVEL TIME
OUTPUT LEVEL
LEVEL
THRESHOLD
THRESHOLD
ATTAC K
RELEASE
INPUT SIGNAL
OUTPUT SIGNAL
(KNEE=HARD)
1.
In the fader module section, press [SEL] to select the
desired channel.
2.
In the COMP area of the CHANNEL EDIT section, press
[DISP].
fig.PopLmt.eps
The LIMITER popup will appear.
fig.PopLmtGuide.eps
IN meter
This indicates the input level of the limiter. For stereo-linked
channels, two meters (L and R) are shown.
GR (Gain reduction) meter
This indicates the amount of gain reduction produced by the
limiter.
Limiter graph
This indicates the approximate response of the limiter.
OUT meter
This indicates the output level of the limiter. For stereo-
linked channels, two meters (L and R) are shown.
Accessing the LIMITER popup
LIMITER popup
2
1
3
4 5
1
2
3
4
M-300_e.book 78 ページ ２０１０年６月２４日 木曜日 午後２時２６分