Filter
Top Products
Reference [Rhythm]
ZOOM HD8/HD16
113
HINT
• For information on the folder structure of the HD8/HD16, see
page 208.
•To assign a sample imported from an external source, select the
folder “0USER” under the “SAMPLER” folder in the root
directory of the hard disk.
6. Turn the dial to select the folder that contains
the desired sample, and press the [ENTER]
key.
Samples contained in the selected folder are shown.
7. Turn the dial to select the sample to assign.
By pressing the PLAY [R] key at this point, you can listen to
the selected sample.
8. Press the [ENTER] key.
The display indication changes as follows.
HINT
With the cursor up/down keys, you can toggle the indication on
the first line of the display between sample name and sample
size.
9. Press the [ENTER] key once more.
The sample is assigned to the pad.
●
To clear the sample assigned to a pad
Select the pad. At the display of step 3, press the
[FUNCTION] key twice to bring up the indication
“CLEAR SAMPLE” on the first line of the display. Then
press the [ENTER] key twice.
HINT
When a sample is cleared from a pad, all pad parameters revert
to the default.
10
. To return to the main screen, press the [EXIT]
key several times.
Volume, panning, and other parameters can be set for each pad
in the drum kit.
1. Press the [RHYTHM] status key repeatedly,
until the key is lit in green.
2. From the main screen, hold down the [SHIFT]
key and press pad 9 (KIT/PROG) so that the
pad lights up.
The display indication changes as follows.
3. Press the [EDIT] key.
A menu for various pad settings appears.
4. Use the cursor left/right keys to select one of
the following items.
● Level
This lets you set the pad output level in the range from 0 –
15.
●
Pan
This lets you set the left/right positioning of the pad sound
when using stereo playback. The setting range is L63 (fully
left) to R63 (fully right). This parameter setting is
independent of the track parameter for panning. When you
adjust the track parameter for panning, the overall stereo
balance will be shifted while keeping the relative
positioning of the pad intact.
●
Voice Group
Selects the type of sound produced when pads are hit in
succession (PL/MN) and the group to which the pad
belongs (0 – 7). The setting range is PL0 – PL7 and MN0 –
MN7. When PL is selected, hitting two pads in succession
will produce overlapping sound, i.e. the previous sound
continues while the next one starts. When MN is selected,
the previous sound stops when the next one starts.
Sample Select
Sample Select
LONGKICK.SP
LONGKICK.SP
Sample name
LONGKICK
LONGKICK
åPAD:1-5
PAD:1-5
Load?
Load?
Making pad parameter settings
ANALOGANALOG
PAD:1-1 LONGKICKPAD:1-1 LONGKICK
Sample assigned to padPad bank number
Pad number