Filter
Top Products
Appendix
ZOOM HD8/HD16
190
CHORUS/DELAY module
Parameter description
REVERB module
Parameter description
Send/return effect
Type Parameter
Chorus
LFO Type Depth Rate Pre Delay EFX Level
Mixes a variable pitch-shifted component to original sound, resulting in full-bodied resonating tone.
Delay
Time Feedback Hi Damp Pan EFX Level Rev Send
Delay effect with max. setting 2000 ms.
Parameter name Setting range Description
LFO Type
Mono, Stereo Sets LFO phase to mono or stereo.
Depth
0 – 100 Adjusts effect depth.
Rate
1 – 50 Adjusts modulation rate.
Pre Delay
1 – 30 Adjusts pre-delay time.
EFX Level
0 – 100 Adjusts effect sound level.
Rev Send
0 – 30 Adjusts delay sound reverb send level.
Time
1 – 2000ms
e
Adjusts delay time.
Feedback
0 – 100 Adjusts feedback amount.
Hi Damp
0 – 10 Adjusts intensity of delay sound high range damping.
Pan
Left10 – Left1, Center,
Right1 – Right10
Adjusts delay sound panning.
Parameter
Hall
Simulates the acoustics of a concert hall.
Room
Simulates the acoustics of a room.
Pre Delay Decay EQ High EQ Low E.R.Mix EFX Level
Hall and Room have the same parameters.
Spring
Simulates a spring reverb.
Plate
Simulates a plate reverb.
Pre Delay Decay EQ High EQ Low EFX Level
Spring and Plate have the same parameters.
Parameter name Setting range Description
Pre Delay
1 – 100 Adjusts pre-delay time.
Decay
1 – 30 Adjusts reverb time.
EQ High
-12 – 6 Adjusts high range effect sound.
EQ Low
-12 – 6 Adjusts low range effect sound.
E.R.Mix
0 – 30 Adjusts mixing ratio of initial reflections.
EFX Level
0 – 100 Adjusts effect sound level.