Filter
Top Products
Reference [Effects]
ZOOM HD8/HD16
131
LINE
MASTERING
CLEAN
DISTORTION
ACO/BASS SIM
BASS
MIC
DUAL MIC
8 x COMP EQ
COMP/LIMITER
COMP/LIMITER
EFX
EFX
PREAMP
PREAMP
3BAND EQ
3BAND EQ
MOD/DELAY
MOD/DELAY
TOTAL
TOTAL
COMP/LIMITER
COMP/LIMITER
EFX
EFX
MIC PRE
MIC PRE
3BAND EQ
3BAND EQ
MOD/DELAY
MOD/DELAY
TOTAL
TOTAL
COMP/LIMITER L
COMP/LIMITER L
MIC PRE L
MIC PRE L
3BAND EQ L
3BAND EQ L
DELAY L
DELAY L
TOTAL
TOTAL
HPF1
HPF1
HPF2
HPF2
HPF8
HPF8
TOTAL
TOTAL
COMP/LIMITER
COMP/LIMITER
ISOLATOR
ISOLATOR
3BAND EQ
3BAND EQ
MOD/DELAY
MOD/DELAY
TOTAL
TOTAL
COMP/Lo-Fi
COMP/Lo-Fi
NORMALIZER
NORMALIZER
3BAND EQ
3BAND EQ
DIMENSION/RESO
DIMENSION/RESO
TOTAL
TOTAL
COMP/LIMITER
EFX PREAMP 3BAND EQ MODULATION/DELAY
ZNR, VOLUME PEDAL,
PATCH LEVEL
COMP/LIMITER
EFX
MICPRE +
DE-ESSER
3BAND EQ MODULATION/DELAY
ZNR, VOLUME PEDAL,
PATCH LEVEL
COMP/LIMITER
MICPRE 3BAND EQ DELAY
ZNR, VOLUME PEDAL,
PATCH LEVEL
VOLUME PEDAL,
PATCH LEVEL
COMP/LIMITER
ISOLATOR 3BAND EQ MODULATION/DELAY
ZNR, VOLUME PEDAL,
PATCH LEVEL
MULTIBAND
COMP/Lo-Fi
NORMALIZER 3BAND EQ DIMENSION/RESONANCE
ZNR, VOLUME PEDAL,
PATCH LEVEL
Algorithm Module indication
HINT
If the indication “Empty” appears instead of the patch name, all
modules for the patch are set to Off. By editing such a patch,
you can create your own settings from scratch.
3. Press the [EDIT] key.
The first line of the display shows the currently selected effect
module. This means that the patch can now be edited.
4. Use the cursor left/right keys to select the
effect module to edit.
The indication shown on the first line for the various effect
modules changes as shown in the table below.
The table applies to the case when the effect module is On.
When the effect module is Off, the indication “Off” appears on
the second line of the display.
HINT
•To edit the ZNR/VOLUME PEDAL module, bring up the
indication “TOTAL” on the first line of the display.
• In the DUAL MIC algorithm, the modules assigned to the L and
R channels can be edited separately. The indication “L” on the
first line of the display means that the module for the left channel
is selected. The indication “R” means that the module for the
right channel is selected.
•<< only>> In the 8x COMP EQ algorithm, there is one
high-pass filter/compressor/EQ per channel. You can control the
respective effect on/off settings separately. The number of the
channel that is currently being set appears on the first line of the
display.
NOTE
<< only>> The 8xCOMP EQ algorithm does not include
the ZNR module.
5. To change the effect type of the currently
selected effect module, turn the dial.
For effect modules which comprise multiple effect types, the
name of the currently selected effect type is shown on the
second line of the display. When you turn the dial in this
condition, the effect type changes.
If the contents of a patch have been changed, the [ ] “Edited”
symbol will appear on the first line of the display.
6. Use the cursor up/down keys to select the
effect parameter that you want to edit.
The displayed parameter depends on the effect module and
effect type.
The following illustration shows an example of what appears
on the display when you have selected the “Depth” parameter
of the “Ensemble” effect.
Effect module
COMP/LIMITER
COMP/LIMITER
Compressor
Compressor
MOD/DELAY
MOD/DELAY
Chorus
Chorus
t
t
MOD/DELAY
MOD/DELAY
t
Ensemble
Ensemble
t
Effect type name
E symbol