Filter
Top Products
Reference [Creating a CD]
ZOOM HD8/HD16
140
HINT
• When adding tracks, a blank of 2 seconds will automatically be
inserted between tracks on the disc.
• As long as the finalizing operation has not been performed, the
CD-R/RW disc cannot be played on an ordinary CD player. (For
information on how to play an unfinalized CD-R/RW disc on the
HD8/HD16, refer to page 143.)
This method involves creating a list for the audio CD (called
an “album”) which combines multiple projects saved on the
hard disk. The CD-R/RW disc is then written in a single
operation. With this method, the disc will be automatically
finalized.
When recording by album, the V-take last selected for the
master track of each project will be selected as source material.
There are two methods for recording by album:
● Track-at-once (TAO)
The master track of each project selected for the album is
written in a separate operation. When a CD-R written with
track-at-once is played on a CD player, a pause of 2 seconds
will occur between tracks.
● Disc-at-once (DAO)
The master tracks of all projects selected for the album are
written in a single operation. When a CD-R written with
disc-at-once is played on a CD player, there will be no
pause between tracks. If necessary, you can use marks set in
the project as PQ subcode information (specifying track
start/stop position and other items) to split up a single
project into multiple tracks.
HINT
You can include playlist information created with the sequence
play function in the album (
→ p. 165).
NOTE
Before starting the procedure, use the trimming function on the
V-takes to be used as source material.
1. Insert a CD-R/RW disc into the integrated
CD-R/RW drive.
Use a blank CD-R/RW disc or a CD-RW disc that has been
completely erased.
2. Verify that the V-takes you want to use for the
audio CD are selected for the master tracks
of the projects.
3. From the main screen, hold down the [SHIFT]
key and press pad 1 (CD-R/RW).
The menu for various CD-R/RW functions appears.
4. Verify that “AUDIO CD” is shown on the
second line of the display, and press the
[ENTER] key.
The display indication changes as follows.
5. Use the cursor left/right keys to bring up the
indication “ALBUM” on the second line of the
display, and press the [ENTER] key.
In this condition, you can select the write method.
6. Turn the dial to select “DAO” (disc-at-once)
or “TAO” (track-at-once), and press the
[ENTER] key.
The display indication changes as follows.
Here you can select whether to create a new list for the album
or use a list that has previously been created.
The available selections are defined as follows.
● New
Create a new album list, with no registered projects.
● Old
Use an album list that was compiled earlier when creating
an audio CD by album.
7. Turn the dial to select “New” and press the
[ENTER] key.
The display for registering projects for the album appears.
The indication “End of Album” denotes the end of the album
list of projects. When the album display is first called up, no
project has been registered, therefore the indication “End of
Album” appears.
8. Turn the dial to select the project to be used
Creating an audio CD by album
AUDIO CD 1/5
AUDIO CD 1/5
>BURN CD
>BURN CD
Album
Album
Burn Type:DAO
Burn Type:DAO
Album
Album
List:New
List:New
Track1
Track1
End of Album
End of Album