Filter
Top Products
MEDIA
1.1
141
Hide unknown file
Select “Hide unknown file” in the utility menu and press the
[F8] key. A check mark will appear at the left of “Hide
unknown file.” With this setting, undefined files will not be
displayed in the directory window. However, this is effec-
tive only if the current directory is a DOS directory.
Translation
Select “Translation” in the utility menu and press the [F8]
key. A check mark will appear at the left of “Translation.”
With this setting, .KMP (Korg multisample parameter) files
and .KSF (Korg sample file) DOS file names will be dis-
played as the multisample name or sample name used in
Sampling mode (if the EXB-SMPL option is installed).
Load selected
This command loads into internal memory the file or direc-
tory that was selected in the “directory window” (1.1–1b).
When you choose “Load selected” from the Utility menu, a
dialog box will appear. The dialog box will differ depending
on the type of file to be loaded.
If the file to load cannot be found, or when loading a
file that was saved in parts
When loading multisample or sample data files (if sample
data RAM is installed), and the TRITON Le cannot find a
necessary file in the current directory or in a lower directory,
a dialog box like the one shown below (“Where is a ...”) will
be displayed. This will appear in the following situations.
•When loading a .KSC file (when sample data RAM is
installed), if the .KMP file used by it cannot be found
•When loading a .KMP file (when sample data RAM is
installed), if the .KSF file cannot be found
•When loading an AKAI S1000/S3000 format Program
file (when sample data RAM is installed), if the Sample
file cannot be found
•When loading a .KSF file (when sample data RAM is
installed) that is larger than the capacity of the media
and was saved across multiple volumes of media, when
the first volume has finished loading and the second or
subsequent volume is needed
If this dialog box appears, take the following action.
1 Select the directory that contains the file requested by
“Where is a ...” If the requested file is on another volume
of media, exchange the media, then press the [MEDIA]
key or a function key to make the TRITON Le recognize
the media, and then select the directory.
It is not possible to open .PCG or .SNG files in the
“Where is a ...” dialog box. The [F6] (“OPEN”) key can-
not be used for .PCG or .SNG files.
2 Press the [F8] (“Select”) key to resume loading. If you
press the [F7] (“Cancel”) key, loading will be halted. If
you press the [F3] (“Skip”) key, the specified files will be
skipped, and the next file will be loaded.
Except for special cases in which the media containing
the specified file has been damaged or is unavailable,
press the [F8] (“Select”) key to continue loading.
1) Load .PCG: selected icon
All data in the .PCG file will be loaded.
1 If the current directory contains a .SNG file or .KSC file of
the same filename, you can select “Load ********.SNG
too” and “Load ********.KSC too”.
• If you check “Load ******.SNG too,” the file with an
identical name to the .PCG file and an extension of .SNG
will also be loaded.
• If you check “Load
********
.KSC too,” the file with an
identical name to the .PCG file and an extension of .KSC
will also be loaded.
2 If you checked “Load ********.KSC too”, set “.KSC Alloca-
tion” to specify how the multisamples and samples
within the .KSC file will be loaded.
Append: The data will be loaded into the numbers after
the last multisample or sample number currently existing
in sample data RAM (i.e., that were previously sampled
or loaded). In this case, only the valid multisamples and
samples will be loaded, and will be packed without leav-
ing vacant numbers (see diagram below).
At this time, programs in the .PCG file that use multisam-
ples listed in the .KSC file will automatically have their
oscillator multisample settings remapped so that each
program uses the correct multisamples. Drum kits in the
.PCG file that uses samples listed in the .KSC file will also
have their drum kit sample settings remapped so that the
drum kit plays the correct samples.
Clear: All multisamples and samples currently existing
in sample data RAM will be cleared, and the multisam-
ples and samples will be loaded in the same configura-
tion as when they were saved (see diagram below).
If you want to load multisamples and samples from
media without erasing the multisamples and samples
that currently exist in sample data RAM, choose
Append.
If you want to reproduce the state in which the data had
been saved, for example immediately after power-on,
choose Clear.
3 To load the data, press the [F8] (“OK”) key. To cancel
without loading, press the [F7] (“Cancel”) key.
KSC000
KSC001
KSC005
KSC003
.KSC file to be loaded
KSC000
KSC002
KSC003
KSC000
KSC002
KSC005
KSC003
KSC000
KSC001
KSC005
KSC003
KSC004
KSC007
KSC006
KSC000
KSC001
KSC005
KSC003
KSC000
KSC002
KSC003
Append
Clear
.KSC Allocation
Internal memory before
loading
Internal memory after
loading