Filter
Top Products
228
The following table shows the operations that the
TRITON Le will perform when control change messages are
received, and the relation between settings and controller
movements on this instrument
TRITON Le operations
when control changes are
transmitted/received
CC
#
Control Value Function
0 Bank select (MSB) 0...127 bank select message MSB *1
1 Modulation 1 0...127 corresponds to joystick movement in the +Y direction (away from yourself)
2 Modulation 2 0...127 corresponds to joystick movement in the -Y direction (toward yourself)
4 Foot controller 0...127 corresponds to when the assignable pedal function is set to Foot Pedal
5 Portamento time 0...127 portamento time
6 Data entry (MSB) 0...127 MSB of RPN and NRPN data *2
7 Volume 0...127 volume *3
8 Post insertion effect panpot 0...127 pan after the insertion effect
10 Panpot 0...127 pan
11 Expression 0...127 volume *3
12 Effect control 1 0...127 for controlling Effect Dynamic Modulation (same as Dmod Src: FX1 #12)
13 Effect control 2 0...127 for controlling Effect Dynamic Modulation (same as Dmod Src: EX2 #13)
16 Controller (CC#16) 0...127 for controlling Modulation, Alternate Modulation (same as AMS: Ribbon #16), Effect
Dynamic Modulation (same as Dmod Src Rbn#16)
17 Knob modulation 1 0...127 corresponds to when Knob Mod.1 is assigned as the B-mode function
of a REALTIME CONTROLS knob
18 Controller (CC#18) 0...127 for controlling Alternate Modulation (same as AMS: Slider #18), Effect Dynamic Modula-
tion (same as Dmod Src: Sld #18)
19 Knob modulation 2 0...127 corresponds to when Knob Mod.2 is assigned as the B-mode function
of a REALTIME CONTROLS knob
20 Knob modulation 3 0...127 corresponds to when Knob Mod.3 is assigned as the B-mode function
of a REALTIME CONTROLS knob
21 Knob modulation 4 0...127 corresponds to when Knob Mod.4 is assigned as the B-mode function
of a REALTIME CONTROLS knob
32 Bank select (LSB) 0...127 LSB of bank select message *1
38 Data entry (LSB) 0...127 LSB of RPN or NRPN data *2
64 Damper 0...127 damper effect
65 Portamento On/Off 0...63(Off), 64...127(On) turn the portamento effect on/off
66 Sostenuto On/Off 0...63(Off), 64...127(On) turn the sostenuto effect on/off
67 Soft 0...127 soft pedal effect
70 Sustain level 0...127 sustain levels of the filter EG and amp EG *4
71 Filter resonance level
High pass filter cutoff frequency
0...127 resonance level of the filter
cutoff frequency of the high pass filter
*5
*4
72 Release time 0...127 release times of the filter EG and amp EG *4
73 Attack time 0...127 attack times of the filter EG and amp EG *4
74 Low pass filter cutoff frequency 0...127 cutoff frequency of the low pass filter *4
75 Decay time 0...127 decay times/slope times of the filter EG and amp EG *4
76 LFO1 speed 0...127 LFO1 speed *4
77 LFO1 depth 0...127 pitch LFO1 intensity *4
78 LFO1 delay 0...127 LFO1 delay *4
79 Filter EG intensity 0...127 filter EG intensity *4
80 SW1 modulation On/Off 0...63(Off), 64...127(On) corresponds to on/off when the SW1 function is set to SW1 Mod.
81 SW2 modulation On/Off 0...63(Off), 64...127(On) corresponds to on/off when the SW2 function is set to SW2 Mod.
82 Foot switch On/Off 0...63(Off), 64...127(On) corresponds to on/off when the function of the assignable foot switch is set to Foot SW
83 Controller (CC#83) 0...127 for controlling Alternate Modulation (same as AMS: MIDI CC#8), Effect Dynamic Modulation
(same as Dmod Src: CC#83)
91 Effect depth 1 (send 2 level) 0...127 send 2 level
92 Effect depth 2 (insertion effect On/Off) 0(Off), 1...127(On) turn insertion effect on/off *6
93 Effect depth 3 (send 1 level) 0...127 send 1 level
94 Effect depth 4 (master effect 1 On/Off) 0(Off), 1...127(On) master effect 1 on/off *6
95 Effect depth 5 (master effect 2 On/Off) 0(Off), 1...127(On) master effect 2 on/off *6
96 Data increment 0
97 Data decrement 0
98 NRPN(LSB) 2
10
11
corresponds to the arpeggiator on/off switch
corresponds to the arpeggiator Gate control knob
corresponds to the arpeggiator Velocity control knob
*7
*7
*7
99 NRPN (MSB) 0 MSB of NRPN
100 RPN(LSB) 0
1
2
select the pitch bend range
select Fine Tune
select Coarse Tune
*2
*2
*2
101 RPN(MSB) 0 MSB of RPN