Filter
Top Products
257
Appendices
6 When all steps have been completed, turn on the power
and make sure that the DRAM SIMM has been installed
correctly. (☞“4. Checking after installation”)
4. Checking after installation
When the power is turned on, the LCD screen will
show the capacity of the currently-installed memory,
and will indicate “EXB-SMPL.”
After installing an option board/memory, be sure to
turn on the power and make sure that the option
board/memory that you installed is displayed in the
LCD screen.
If it is not displayed, the installation may not have been
performed correctly. Check once again that the board is
installed correctly.
If you have any questions regarding installation, please
contact
your local Korg distributor.
• EXB-SMPL: EXB-SMPL is installed
• SIMM Slot1: If a SIMM is installed in SIMM slot 1, the
capacity of the SIMM “(**MB)” will be displayed.
If no SIMM is installed, the display will indicate “----”.
• SIMM Slot2: If a SIMM is installed in SIMM slot 2, the
capacity of the SIMM “(**MB)” will be displayed.
If no SIMM is installed, the display will indicate “----”.