Filter
Top Products
31
COMBI
1.1
2.12.23.13.23.33.44.14.24.34.46.17.17.2
2. Combination mode
For details on how to select pages in Combination mode,
refer to p.1.
In this display page you can select and play Combinations.
A Combi allows you to use up to 8 programs at one time
from the keyboard.
1.1–1: Combi (Combination)
1.1–1a: Bank, Combi Select, Category, Cat.Hold,
10’s Hold, (Tempo)
Bank (Bank Select) [Bank A…C]
This is the Combination bank display.
Use the front panel BANK [A]–[C] keys to select the bank.
On this instrument, there are a total of 384 combination pro-
grams in three rewritable banks (A, B, C), each containing
128 combinations. (
☞For a list of the factory-set combina-
tions, refer to the separate VNL.)
If you have selected the “Program Select” (1.1–2c) edit
cell for one of the timbres 1–8 in the Prog page, Bank
[A]–[GM] will switch the program banks for timbres 1–
8.
Combi Select (Combination Select) [0...127: name]
Here you can select a combination. Select this parameter,
and use the [INC], [DEC] keys, numeric keys [0]–[9], or the
[VALUE] dial to select a combination. You can also select
combinations by category, or using “10’s Hold.” (
☞p.2
“Cat.HOLD,” ”Select by Category,” “10’s HOLD”)
You can select Combis by receiving MIDI program
changes via a connected external MIDI device, or by
using a foot switch. (
☞p.125 “Foot SW Assign” (GLO-
BAL 1.1–3a), p.222 “Foot Switch Assign List”)
COMBI PAGE MENU
Play 1.1: Play Select and play combinations. Select a
program for each timbre, and set sta-
tus, pan, and level. Select an arpeggio
pattern and make settings. (
☞p.31)
P/M 2.1: Ed-Prog/Mix Select a program for each timbre, and
set pan and level. (Same as the 1.1:
Play parameters; can be edited from
either page.) (
☞p.35)
Ctrl 2.2: Ed-Ctrl Controller settings. (☞p.36)
Prm1 3.1: Ed-Param1 MIDI, OSC, and Pitch settings for each
timbre. (
☞p.36)
Prm2 3.2: Ed-Param2 Delay and scale settings for each tim-
bre. (
☞p.38)
KeyZ 3.3: Ed-Key Zone Key zone settings for each timbre.
(
☞p.39)
VelZ 3.4: Ed-Vel Zone Velocity zone settings for each timbre.
(
☞p.40)
MIDI1 4.1: Ed-MIDI Filter1 MIDI message transmission/reception
filter settings for each timbre, such as
Prog Change and After Touch. (
☞p.41)
MIDI2 4.2: Ed-MIDI Filter 2 Filter settings such as JS and Ribbon
Ctrl. (
☞p.41)
MIDI3 4.3: Ed-MIDI Filter 3 Filter settings; REALTIME CONTROL
Knob (
☞p.42)
MIDI4 4.4: Ed-MIDI Filter 4 Filter settings; SW, Other Ctrl Change
(
☞p.42)
Arp 6.1: Ed-Arp. Arpeggiator settings. (Same as the 1.1:
Play parameters; can be edited from
either page.) (
☞p.43)
IFX 7.1: Ed-InsertFX Bus and master effect send level set-
tings for each timbre.
Insert effect routing, selection, and set-
tings. (
☞p.45)
MFX 7.2: Ed-MasterFX Master effect selection and settings.
Master EQ settings. (
☞p.47)
COMBI 1.1: Play
Bank A
Preloaded combinationsBank B
Bank C
1.1–1a
1.1–1b
1.1–1c