Filter
Top Products
225
Appendices
Sequencer mode
When one of the TRITON Le’s controllers is operated, its
effect will apply to the track 1–16 that is selected by “Track
Select” (SEQ 1.1–1c).
If the “Status” (SEQ 3.1–1a/2a) of the track selected by
“Track Select” is EXT, EX2, or BTH, a control change mes-
sage will be transmitted on the MIDI channel specified by
“MIDI Channel” (SEQ 3.1–1a/2a).
If the “Status” is INT or BTH, operating one of the
TRITON Le’s controllers will affect only that track. Simulta-
neously, the same effect will also apply to any track with the
same “MIDI Channel” setting.
In the case of Master Volume, the universal exclusive
message Master Volume will be transmitted.
You can make settings for MIDI Filter (SEQ 4.1–4.4) to
enable or disable control changes and controllers for
each track. When checked, the operations effective for a
“Status” of INT or BTH will be enabled. Tracks whose
“Status” is EXT, EX2, or BTH will transmit control
changes regardless of this setting.
Effect dynamic modulation can be controlled when the
“Control Ch (Control Channel)” (SEQ 7.1–1b, 7.2–1a, 7.2–1c)
setting for IFX, MFX1, 2, or MEQ matches the MIDI channel
of the track selected by “Track Select.” (In the case of All Rt.,
control is possible on the MIDI channel of all routed tracks.)
If one of the TRITON Le’s controllers is operated during
realtime recording, the corresponding or assigned control
change will be recorded.
Sampling mode
When one of the TRITON Le’s controllers is operated, a con-
trol change message will be transmitted on the global MIDI
channel (“MIDI Channel” GLOBAL 2.1–1a).
In the case of Master Volume, the universal exclusive
message Master Volume will be transmitted.
It is not possible to make AMS settings in Sampling
mode.
* Global MIDI channel:
GLOBAL 2.1: MIDI “MIDI Channel” (2.1–1a)