Filter
Top Products
43 0
Startup System
To start the VPS operation, system installation and line
connections must be done beforehand. See Chapter 2.
Status of the
Power Indicator
1
mm=M=l
2
Turn on the POWER switch of the VPS.
System Setup is started and the display shows:
1
3
When System Setup is completed successfully, the display
shows:
(In D-PITS Integration mode)
(In non-D-PITS Integration mode)
If System Setup is not comdeted successfullv
(In D-PITS Integration mode)
Active COs : 1 2 3 4
DPITS Interface Connection is not Established
** OFF LINE MODE **
>
4-6
Note:
System Administrator
“Active COs” in the above screens means “Active Ports”.