Filter
Top Products
71 a
Utility Commands
Type “ELOG”, then press [RETURN].
i ELOG
DEVICE
1. CPU
2. CLOCK
3. DISK
4. DSP’
5. DSP’
6. CPU
ERROR
MEM-GET
DATA R/W (xx:yyyy)
TIME
JUL-14 14:00 PM
JUL-14 14:00 PM
JUL-14 14:00 PM
SCAN
FIFO
APPLICATION (x)
JUL-14 14:OO PM
JUL-14 14:00 PM
JUL-14 14:00 PM
* = Port number
Note:
Types of errors displayed on the screen and their meanings are as
follows:
Device error log indications
CPU
Indication
MEM-GET
Meaning
CPU card software memory acquisition error.
CPU card is short of memory temporarily because
of too ,much. traffic.
CLOCK
Clock access error. Clock IC is out of order.
Check the hardware.
DISK DATA R/W (xx:yyyy)
DSP* SCAN
HDD access error. If there is a sector which
often causes errors, check the disk.
xx : IDE error code
yyyy : read/write error sector number
DSP-SCAN error. DSP is out of order. Check
the hardware.
DSP*
FIFO
CPU
APPLICATION (x)
DSP/FIFO error. During the system is handling
calls, there is wrong with DSP and FIFO memory
temporarily.
Application error. During the system is handling
calls, temporal application error occurs.
x: port number
* = Port number (1 - 4)
7-6 Maintenance