Filter
Top Products
22 0
Ifistallation
Mounting
the VPS on the Wall
The wall where the VPS is to be mounted must be able to support the weight of
the VPS. If screws other than the ones supplied are used, use the same-sized di-
ameter screws as the enclosed ones.
To Mount on a Wooden Wall:
1
3
Hook the unit on the screw heads.
Place the template on the wail to
mark the 3 screw positions.
2
Install the 3 screws into the wall.
Template
TVS 75
TVS 100
r
Drive the screw-
Note: You can find the TVS75’s template in this Installation Manual. See the
page after Chapter 7. The TVSlOO’s template is included with the unit.
2-10 Installation