Filter
Top Products
4.5.6 Hardware Settings
r
Parameter
CPC Signal
Value Range
(default)
Description/Function
Reference
I. None Specifies the minimum time required to detect a
PBX Type
2. 6.5 msec
break in the CPC (Calling Party Control) signal
p.479
3. 150 msec from the PBX. The VPS detects that the line has
4. 300 msec
been disconnected when there is a break of the
5. 450 msec CPC signal.
6.600 msec
(None)
Disconnect 1-8 set
Time
(2)
Specifies the amount of time that the line is
temporarily unavailable to access after a call has
ended.
Dial Mode
1. DTMF Specifies dial mode for DTMF or Pulse.
2. Pulse 10 pps If you specify Pulse, pulse speed (lo/20 pps) must
3. Pulse 20 pps be selected.
(DTMF)
4.5.6.3 PBX Interface Parameters
Three types, of parameters are used to program the VPS for optimal signaling and
performance with your PBX.
System Administration Top Menu + 1 + 6 -+ 3
Program - Hardware
- PBX interface Menu
1. Dialing Parameters
2. lnband Signaling
3. Digit Translation Table
SELECT ITEM AND PRESS RETURN-KEY
4.5.6.3.1 Dialing Parameters
These parameters tell the VPS how to initiate and control call transfers, how to set
up outgoing calls and how to control message waiting lamps on extensions. The
easiest way to verify the correct code sequences for non-Panasonic KX-T series
telephone systems is to manually execute the sequences from a single line telephone
(SLT) with your PBX.
4-78 System Administrator