Filter
Top Products
Station Programming
Two-Way Record Button (Assignment) *
All.ows you to assign a Flexible (CO, DSS) button as a Two-Way Record button.
- Be sure that you are in the Station Programming mode: Press [PROGRAM][9][9].
1. Press the desired Flexible (CO, DSS) button which you wish to
assign as a Two-Way Record button.
2. Dial 90.
l
The display shows:
3. Enter the extension number of the voice mail.
l
The display shows:
(xxxx: VM extension number)
-
l
To erase the entry, press the CLR (S2) button or the TRANSFER
(CLEAR) button.
(The TRANSFER button becomes the CLEAR button while in programming
mode.)
4. Press STORE button.
l
The STORE indicator light turns on.
l
The display shows the initial programming mode.
- To exit from Station Programming mode: Press [PROGRAM] or lift the handset.
Conditions
l
You cannot enter a non-existent extension or a floating number.
l
The voice mail extension number is acceptable, if the number is assigned in program [ 1171.
18 Station Programming
* : Requires KX-TD 1232 with digital proprietary telephone integration software.