Filter
Top Products
4.55 System Parameter Settings
Parameter
Value Range
(default)
Description/Function
Reference
Automatic
Transfer of
Incoming Fax
Call
1: Disable
2: Enable
(Disable)
Activates or deactivates the automatic transfer of
FdX
Fax Management service.
Management
p.3-24
Main Fax 2-5 digits
Extension No. (None)
Specifies a fax extension number which serves as
the main fax.
Alternate Fax
Extension No.
2-5 digits
(None)
Specifies a fax extension number which serves as
the backup for the main fax extension.
When the main fax extension is busy or if there is
no answer within “Fax No-answer Time”, the VPS
will transfer a fax call to this extension.
Fax No-answer
Time
5-60 set
(10)
Specifies the length of time in seconds the VPS is
to wait before taking another action if there is no
answer.
[Note]
This timer applies to the fax call which has been
transferred to the main fax or alternate fax
extension1
Fax Manager
Mailbox No.
2-5 digits
(None)
Specifies the mailbox number of the Fax Manager
to which the VPS will notify
status
of fax calls
depending on “Fax No-answer Coverage Mode”
and “Fax Notification Mode” settings.
Fax No-answer 1. No If set to -‘Mbx”, the VPS will leave the number of
Coverage Mode 2. Mbx unanswered fax calls in the Fax Manager’s
3. Extn. mailbox.
(No)
Example:
r-
7
The FAX transfer situation is as follows.
L
One attempt was no answer.
/
If set to “Extn.“, the VPS will call the Fax
Manager’s extension to inform the number of
unanswered fax calls.
The VPS will also leave the number of
unanswered fax calls in the Fax Manager’s
mailbox.
If set to “No”. the VPS does not take any action
on unanswered fax calls.
4-74 System Administrator