Panasonic panasonic Recording Equipment User Manual


 
54
l
Setting COS (Class of Service)
Parameters
m Accept
42
The current setting of MWL Notification for Unreceived
Message is played.
Press 0 to change the setting (enable or disable).
43 Confirm your entry and press m to accept.
44 The current setting of Device Notification for Unreceived
Message is played.
Press 0 to change the setting (enable or disable).
45 Confirm your entry and press Q to accept.
External Message Delivery Status
46
The current setting is played.
Press 0 to change the setting (enable or disable).
If the External Message Delivery Status is enabled, you can set the
prompt mode for receiving external delivery messages.
47 Press 0 - m to choose the desired mode or press m to
accept it.
Tip: Step 47 -
0 System Prompt
m User
1
Prompt
IE) User 2 Prompt
m Selective Prompt
m Accept
Auto Forwarding Status
48 The current setting is played.
Press 0 to change or m to accept.
If Auto Forwarding is enabled, go to step 49 - 55.
49 Press 0 to change the mailbox number.
50
Enter the mailbox number. .
.
51
Confirm your entry and press m to accept it.
‘. 52 Press 0 to change delay time.
The
delay time is the amount of time after which the message will
be automatically forwarded. For example, 1 hour and
15
minutes
is 115#, 30 minutes is 30#.
53 Confirm your entry and press a to accept it.
54 Press 0 to change the current forwarding mode (copy or
move).
55 Confirm your entry and press m to accept it.
5-10 System Manager