Panasonic panasonic Recording Equipment User Manual


 
4.3.1 Quick S&up
Incoming call services for all ports (Day/Night) can be defined for each port by this
seltings on the screen.
“PORT 1 (Day) ---- : Auto. Attend. (using Custom I)” indicates that incoming call service for Port
1 (Day) is set to Custom 1 and callers to this port will receive Automated Attendant service.
You can change “Auto. Attend.” to “Voice Mail”.
In this case, Custom service
No. will be changed from 1’ to ‘2’ automatically.
The default values of the ports depend on the position of the rotary switch you used
when starting up the system (see page 4-6):
Position 0 or 2 -----Auto. Attend. (using Custom 1)
Position 3 ------------Voice Mail (using Custom 2)
If you want to select other incoming call services, see Port Assignment on page
4-37.
Note:
l
Applicable VPS ports depend upon the models.
TVS75 - Port 1,2
TVS 100 - Port 1-4
Step 6. Password setting
Quick Setup - Password Setting
System Administrator Password
(Maximum 8 characters)
NEW PASSWORD : =
VERIFICATION : =
System Reset/Clear Password
(Maximum 8 characters)
NEW PASSWORD : =
VERIFICATION : =
.
You can assign the System Administrator password and System Reset/Clear
password in this screen, if necessary.
You can go to the next screen without assigning the password by pressing
[RETURN]. -
System Administrator
4-13