Filter
Top Products
4.5.5 System Parameter Settings
!
Parameter
Outgoing Call
Seiup
Sequence
Value Range
(default)
ip to 12 digits
consisting of
o-9, x, #,
F, R, S,
T, W
(-0
Description/Function
Specifies the sequence of codes used by the VPS
to make a call to an outside line. You can set up
to 12 digits. The default
value
is ‘T’, which
means that the VPS dials the outside phone
numbers after detecting dial tone.
Example:
9W = [9] + I-second wait + dial outside phone
number.
‘9’ is the CO line access number.
F : Hook Flash
R : Ring Back Tone Detection
S : Silence Detection
T : Dial Tone Detection
W :Wait for 1 second
1-9, 0, *, # : Dial Codes
41556.3 Message Waiting Notification
Reference
E.M.D.
Service
p.3-22
M.W.N.-
Device
p.3-38
The following parameters are used to control the handling of message notification
calls.
System Administration Top Menu + 1 + 5 + 6 + 3
Program - System Parameter - Others - Message Waiting Notification Menu
Outgoing Call Ports
: 1, 2, 3, 4
Message Waiting Lamp Ports------------------- : 1, 2, 3, 4
Message Waiting Lamp for Every Message
: No
Max. Digits for Callback No. (l-48 digits) ---- :
20
Callback No. Entry lnterdigit Time-Out (l-10 set) -- :
5
System Callback No. -
. . . . . . . . . . .
. . . . . . . . . . . .
4-66
System Administrator