Filter
Top Products
107
Playing in Multitimbre Mode
Playing in Multitimbre Mode
Selecting a Multitimbre
The Fantom has two multitimbre groups, including the User group
and Preset groups, with each group storing 16 multitimbres, for a
total of 32 multitimbres.
USER
This is the group inside the Fantom which can be rewritten.
performances you yourself create can be stored in this group. The
Fantom contains 16 preset multitimbres.
PRST (Preset)
This is the group inside the Fantom which cannot be rewritten.
However you may modify the settings of the currently selected
multitimbre, and then store the modified multitimbre in User
memory. The Fantom contains 16 preset multitimbres.
1. Access the MULTITIMBRE PLAY screen (p. 106).
fig.07-02.e
2. Press [CURSOR] to move the cursor to the multitimbre
group.
3. Turn the VALUE dial, or press [INC]/[DEC] to select a
multitimbre group.
USER: User
PRST: Preset
4. Press [CURSOR] to move the cursor to the multitimbre
number.
5. Turn the VALUE dial or press [INC]/[DEC] to select the
multitimbre number.
Selecting Multitimbres from a List
You can display a list of performances and select a multitimbres
from that list.
1. In the MULTITIMBRE PLAY screen, make sure that the
cursor is located at the multitimbre group or multitimbre
number.
2. Press [LIST].
The Multitimbre List window appears.
fig.07-03_50
3. Press or to choose the multitimbre.
4. To switch the multitimbre group, press to move the
cursor to the multitimbre group tab, and press or to
select the multitimbre group.
5. After switching the multitimbre group, press to move the
cursor within the list, and press or to select the
multitimbre.
6. Press [EXIT] to close the Multitimbre List window.
Multitimbre number
Multitimbre group