Filter
Top Products
31
Playing in Patch Mode
Playing in Patch Mode
Patch mode is the mode in which you can play the keyboard using a
single sound (patch or rhythm set). If a rhythm set is selected, you
can play percussion instruments from the keyboard.
About the PATCH PLAY Screen
Displaying PATCH PLAY Screen
To access the PATCH PLAY screen, use the following procedure.
1. Press [MODE].
The Mode window appears.
fig.01-12_50
2. Press or to select a “PATCH,” and then press [8
(Select)].
You will enter Patch mode, and the PATCH PLAY screen
appears.
fig.PATCH_50
Functions in the PATCH PLAY Screen
fig.02-01.e
Indicates the current sound generating mode.
Displays the type of effect used.
Indicates the song file name.
Indicates the name of the currently selected song,
the measure location, the time signature, and the sequencer status.
Indicates the group of the selected patch.
Patch/rhythm set select switch
Determines whether you will be selecting patches or rhythm sets.
Indicates the MIDI transmit channel (Tx Ch)
and receive channel (Rx Ch).
This indicates the function that is assigned to the D Beam controller,
and the response status of the D Beam controller.
Indicates/sets the tempo at which the song,
Arpeggio or rhythm pattern is played.
Indicates the tone
On/Off status.
Indicates/selects the
patch category.
Selects whether the patch
category will be locked.
Indicates/selects the group, number,
and name of the selected patch.
Indicates the functions that are assigned to each
realtime controller knob (●) and button (■).
The value will be displayed when you turn the knob.
Indicates the names of the patches or
rhythm sets that can be selected by [1]–[8].
Sets the Octave Shift (Oct)
and the Transpose (Trans).
Switches multi-effects (MFX),
chorus (CHO),
and reverb (REV) on and off.
Turns the RPS function on/off (RPS).
Turns Loop Play on/off (LOOP).