Filter
Top Products
33
Playing in Patch Mode
Playing in Patch Mode
Selecting Favorite Patches
(Favorite Sound)
You can bring together your favorite and most frequently used
patches in one place by registering them in the Favorite sound. By
using this function, you can rapidly select favorite patches from
internal memory or a Wave Expansion Board.
If a patch stored in a Wave Expansion Board has been registered
as a Favorite Sound, it cannot be selected unless the
corresponding wave expansion board is installed.
For instructions on how to register to the Favorite Sounds, refer
to “Registering a Favorite Patch (Favorite Sound)” (p. 46).
Selecting from [1]–[8]
1. Access the PATCH PLAY screen (p. 31).
2. Press [1]–[8] to select a patch.
fig.02-03.e
3. To switch the favorite sound bank, hold down [JUMP] and
press [1]–[8].
Selecting from the Favorite List Window
1. In the PATCH PLAY screen, make sure that the cursor is
located at the patch group or patch number.
2. While holding down [SHIFT], press [LIST]
The Favorite List window appears.
fig.02-04_50
3. Press or to choose the patch.
By pressing [7 (Prevu)] you can audition the sound of the patch,
by means of a phrase preselected as being suitable for that
particular type (category) of patch (Phrase Preview).
4. To switch banks, press to move the cursor to the “Bank
1–8” tab, and press or to select the desired bank.
5. After switching the bank, press to move the cursor within
the list, and press or to select the patch.
6. When you press [8 (Select)], the patch will be selected, and
the Favorite List window will close.
Selecting Patches from the List
You can display a list of patches and select a patch from that list.
1. In the PATCH PLAY screen, make sure that the cursor is
located at the patch group or patch number.
2. Press [LIST].
The Patch List window appears.
fig.01-18_50
3. Press or to choose the patch.
4. To switch patch groups, press to move the cursor to the
patch group tab, and press or to select the patch
group.
5. After switching the patch group, press to move the
cursor within the list, and press or to select the
patch.
6. Press [EXIT] to close the Patch List window.
In the Patch List window, you can press [7 (Ctg)] to add a check
mark (✔) and switch to viewing a list organized by category.
Here you can select patches by category (p. 34).
Press [1]–[8] to select a patch