Filter
Top Products
143
Editing Songs
Editing Songs
Deleting Unwanted Measures
(Delete)
This function deletes a specified area of sequencer data, and moves
the subsequent data to fill the gap. As a result, the measure length
will be shortened by the number of deleted measures.
1. Access the Song Edit screen, and then load the song you
want to edit (p. 136).
2. Press [8 (Track Edit)].
The Track Edit window appears.
3. Press or to select “Delete,” and then press [8
(Select)].
A message of “DELETE: Select target point.” will be displayed.
4. Use [CURSOR] to move the cursor to the first measure of the
track or pattern that you want to delete. If you want to
specify all tracks, press [7 (TrkAll)].
5. Hold down [SHIFT] and press to move the cursor to the
last measure of the track or pattern that you want to delete,
and press [8 (Select)] to specify it.
The Track Edit (Delete) window appears.
fig.11-16_50
6. Use [CURSOR] to move the cursor to the desired parameter,
and turn the VALUE dial or press [INC]/[DEC] to make the
setting. First check the region that is to be affected by the
operation, and correct it if necessary.
Track
Check/correct the track(s) or pattern that is to be deleted.
Value
ALL: Phrase tracks 1–16, the beat track, and the tempo track
TRK 1–TRK 16: The specified phrase track
TEMPO: Tempo track
PTN001–PTN100: The specified pattern
Measure, for (Edit Range)
Check/correct the range of measures that are to be deleted. If you set
“for” to “ALL,” all measures will be specified.
7. When you have finished making settings, press [8 (Execute)]
to execute the operation.
Copying Phrases (Copy)
This function copies a specified area of sequencer data. It is
convenient for repeating the same phrase several times. You can
copy patterns to a phrase track, or copy data from a phrase track to a
pattern.
1. Access the Song Edit screen, and then load the song you
want to edit (p. 136).
2. Press [8 (Track Edit)].
The Track Edit window appears.
3. Press or to select “Copy,” and then press [8
(Select)].
A message of “COPY: Select source point.” appears.
4. Use [CURSOR] to move the cursor to the first measure of the
copy-source track or pattern. If you want to specify all
tracks, press [7 (TrkAll)].
5. Hold down [SHIFT] and press to move the cursor to the
last measure of the copy-source track or pattern, and press
[8 (Select)] to specify it.
A message of “COPY: Select destination point.” appears.
6. Use [CURSOR] to move the cursor to the measure of the
copy-destination track or pattern, and press [8 (Select)] to
specify it.
The Track Edit (Copy) window appears.
fig.11-17_50
7. Use [CURSOR] to move the cursor to the desired parameter,
and turn the VALUE dial or press [INC]/[DEC] to make the
setting. First check the region that is to be affected by the
operation, and correct it if necessary.
Track (Source Track)
Check/modify the copy-source track(s) or pattern.
Value
ALL: Phrase tracks 1–16, the beat track, and the tempo track
TRK 1–TRK 16: The specified phrase track
TEMPO: Tempo track
PTN001–PTN100: The specified pattern
Measure, for (Edit Range)
Check/modify the range of copy-source measures. If you set “for” to
“ALL,” all measures will be specified.