Filter
Top Products
97
Creating a Performance
Creating a Performance
Realtime Controller / D Beam
Controller Settings (Controller)
fig.06-11_50
For details on the setting, refer to “How to Make the
Performance Settings” (p. 91).
Knob
Assign 1–4 (Realtime Control Knob Assign 1–4)
Specify the functions that will be controlled by the [ ]–[ ] knobs.
Value
OFF: The realtime control knob will not be used.
CC01–31, 33–95: Controller numbers 1–31, 33–95
For more information about Control Change messages, please
refer to “MIDI Implementation” (Sound/Parameter List).
PITCH BEND: Pitch Bend
AFTERTOUCH: Aftertouch
TEMPO: Tempo
ARP VAR: Arpeggio Variation
ARP ACCENT: Arpeggio Accent Rate
ARP SHFFLE: Arpeggio Shuffle Rate
ARP OCTAVE: Arpeggio Octave Range
PTN ACCENT: Rhythm Pattern Accent Rate
PTN SHFFLE: Rhythm Pattern Shuffle Rate
Zone 1–4 (Realtime Control Knob Zone
Number 1–4)
Specify the zone that will be controlled by each knob [ ]–[ ].
The effect will apply only to the part that is connected to the zone
you specify here.
Value: 1–16
Switch
Assign 1–4 (Realtime Control Button Assign 1–
4)
Specify the functions that will be controlled by the [ ]–[]
buttons.
Value
OFF: The realtime control button will not be used.
CC01–31, 33–95: Controller numbers 1–31, 33–95
For more information about Control Change messages, please
refer to “MIDI Implementation” (Sound/Parameter List).
BEND UP: Raises the pitch in semitone steps (up to 4 octaves
higher).
BEND DOWN: Lowers the pitch in semitone steps (up to 4 octaves
lower).
AFTERTOUCH: Aftertouch
OCT UP: Raises the key range in octave steps (up to 3 octaves
higher).
OCT DOWN: Lowers the key range in octave steps (up to 3 octaves
lower).
TRNS UP: Raises the key range in semitone steps (up to 6 semitones
higher).
TRNS DOWN: Lowers the key range in semitone steps (up to 5
semitones lower).
TAP TEMPO: Tap tempo (a tempo specified by the interval at which
you press the button).
MONO/POLY: Pressed to toggle between polyphonic (POLY) and
monophonic (MONO) play of a patch.
ARP HOLD: Switch between Hold On/Hold Off for the Arpeggiator
performance.
PTN HOLD: Switch between Hold On/Hold Off for the Rhythm
pattern playback.
ZONE INT: Turn the Internal Switch on/off for the zone.
ZONE EXT: Turn the External Switch on/off for the zone.
Mode 1–4 (Realtime Control Button Mode 1–4)
Specify how the [ ]–[ ] buttons are to operate.
Value
MOMENTARY: The button will be on only while you are pressing
(holding) it, and will be off when you release your finger from the
button.
LATCH: The button will switch on/off each time you press it.
Zone 1–4 (Realtime Control Button Zone
Number 1–4)
Specify the zone that will be controlled by each button [ ]–[ ].
The effect will apply only to the part that is connected to the zone
you specify here.
Value: 1–16