Filter
Top Products
126
Playing Back a Song
Using the D Beam Controller to
Start/Stop Song Playback
You can start/stop song playback by passing your hand over the D
Beam controller.
1. Select the song that you want to play back (p. 122).
2. Hold down [JUMP] and press D BEAM [ON/OFF].
The D Beam window appears.
fig.09-06_50
3. Use [CURSOR] to move the cursor to “Assign.”
4. Turn the VALUE dial or press [INC]/[DEC] to set this to
“START/STOP.”
5. Press D BEAM [ON/OFF] to turn on the D Beam controller.
6. When you pass your hand across the D Beam controller,
song playback will start. When you pass your hand across it
once again, playback will stop.
You can also start/stop song playback by using a pedal
connected to the CTL 1/CTL 2 PEDAL jack (p. 184).