Filter
Top Products
113
Creating a Multitimbre
Creating a Multitimbre
Type (Initialize Type)
There are three initialize methods. Select either of them depending
on the application.
DEFAULT: Resets the currently selected multitimbre in the
Temporary memory to the standard values. This is called a ‘Initial
Data.’ Use this setting when you wish to create a sound from scratch.
PRESET: Resets the currently selected multitimbre in user memory
to the factory settings.
MFX TEMPLATE: The multi-effect settings of the currently selected
multitimbre will be set to the MFX template settings.
If the currently selected multitimbre is preset memory (PRST)
data, initializing with the “PRESET” setting will set the values to
those of the identically numbered user memory.
For details regarding MFX template, refer to “MFX Template
List” (Sound/Parameter List).
5. If you’ve set the initialization type to “MFX TEMPLATE,”
move the cursor to “Template” and select an MFX template.
Then move the cursor to “MFX,” and select the relevant MFX
(MFX-A–MFX-C).
6. Press [8 (Execute)].
The initialization will be carried out, and you’ll be returned to
the Multitimbre Edit screen.
Copying Multitimbre Settings (Copy)
This operation copies the settings of any desired multitimbre to the
currently selected multitimbre. You can use this feature to make the
editing process faster and easier.
Basic Procedure for Multitimbre Copy
1. Access the MULTITIMBRE PLAY screen, and select the
copy-destination multitimbre (p. 107).
2. Access the Multitimbre Edit screen (p. 112).
3. Press [8 (Copy)].
The Multitimbre Copy window appears.
fig.08-04_50
4. Move the cursor to “Mode,” and select the data that you
wish to copy.
Three types of copy are available: Multitimbre Name Copy,
Multitimbre Effects Copy, and Multitimbre Part Copy. You
should select the one that is relevant to the type of data you wish
to copy. For details refer to “Types of Multitimbre Copy”
(following section).
5. Move the cursor to “Source,” and select the copy-source
sound.
6. Press [8 (Execute)] to execute the copy.
7. Press [EXIT] to return to the Multitimbre Edit screen.
Types of Multitimbre Copy
Multitimbre Name Copy (NAME)
The name of a patch, rhythm set, multitimbre, or performance will
be copied to the currently selected multitimbre.
fig.08-04_50
Multitimbre Effects Copy (MFX/CHORUS/
REVERB)
The effect settings of a patch, rhythm set, multitimbre, or
performance will be copied to the currently selected multitimbre.
fig.08-05.e
Effect contents that will be copied (Mode)
MFX: Multi-effects settings
CHORUS: Chorus settings
REVERB: Reverb settings
If you want to copy the multi-effect settings of a multitimbre or
performance, select the MFX (MFX-A–MFX-C) whose data will be
copied.
Multitimbre Part Copy (PART)
Part settings of a multitimbre will be copied to the part you specify
of the current multitimbre.
fig.08-06.e
To specify the currently selected multitimbre as the copy source,
set “Source” to “TEMP.”
Copy-source multi-
effects
Copy-destination multi-
effects
Copy-source part Copy-destination part