Filter
Top Products
● Storing a Drum instrument
1. Select a Drum Part and Drum Set, and create a drum instrument (“Drum edit-
ing procedure” p.42).
If the above screen is displayed after you create a drum instrument, you can use the follow-
ing procedure to save your data as a User Drum Set. If the screen display is different than
the one shown above, use following procedure
2, 3.
2. Make sure that the [ALL] indicator is dark.
If it is lit, press [ALL] to turn it off.
3. Simultaneously press [SELECT] and EFX TYPE [ll
ll
].
The display will show the Part Group (p.23), Part Mode (p.27), Drum Set number, Note
name, and Drum Instrument name (p.43).
PART
INSTRUMENT
AD1
100 0
LEVEL
PAN
001 C#3 CrshCym1
PART
INSTRUMENT
AD1
100 0
LEVEL
PAN
001 C#3 CrshCym1
Note Name
Drum Instrument name
Drum set number
Part Mode
Part Group
SELECT
EFX ON/OFF
USER
INST
VIB RATE
AT TACK
VIB DEPTH
CUTOFF
DECAY
VIB DELAY
RESONANCE
RELEASE
EFX VALUEEFX PARAMEFX TYPE
3
Chapter 5. Convenient functions
103