Filter
Top Products
OD1 Amp Sw (OD1 Amp Switch) Off/On [4]
Turn OD1 Amp on/off.
OD1 Pan (OD1 Output Pan) L63 - 0 - R63 [16]
Set the stereo location of the overdrive or distortion
sound for set 1. L63 is far left, 0 is center, and R63
is far right.
OD1 Level 0 - 127 [17]
Adjust the overdrive or distortion volume for set 1.
<OD2 (Overdrive/Distortion 2)>
OD2 Sel (OD2 Select) Odrv/Dist [6]
Select either Overdrive or Distortion for set 2.
#OD2 Drive (OD2 Drive) 0 - 127 [7]
Adjust the depth of distortion for set 2. The volume
will change together with the depth of distortion.
OD2 Amp (OD2 Amp Simulator Type)
Small/BltIn/2-Stk/3-Stk [8]
Select the type of guitar amp for set 2.
Small : small amp
BltIn : single-unit type amp
2-Stk : large double stack amp
3-Stk : large triple stack amp
OD2 Amp Sw (OD2 Amp Switch) Off/On [9]
Turn OD2 Amp on/off.
OD2 Pan (OD2 Output Pan) L63 - 0 - R63 [18]
Set the stereo location of the overdrive or distortion
sound for set 2. L63 is far left, 0 is center, and R63
is far right.
OD2 Level 0 - 127 [19]
Adjust the overdrive or distortion volume for set 2.
Level (Output level ) 0 - 127 [20]
Adjust the output level.
60: OD / Rotary (Overdrive/Distortion, Rotary)
[11H, 04H]
This connects Overdrive or Distortion in parallel with
Rotary.
<OD (Overdrive/Distortion)>
OD Sel (OD Select) Odrv/Dist [1]
Select either Overdrive or Distortion.
+OD Drive (OD Drive) 0 - 127 [2]
Adjust the depth of overdrive or distortion. The vol-
ume will change together with the depth of distor-
tion.
OD Amp (OD Amp Simulator Type)
Small/BltIn/2-Stk/3-Stk [3]
Select the type of guitar amp for overdrive or distor-
tion.
Small : small amp
BltIn : single-unit type amp
2-Stk : large double stack amp
3-Stk : large triple stack amp
OD Amp Sw (OD Amp Switch) Off/On [4]
Turn the OD Amp parameter on/off.
OD Pan (OD Output Pan) L63 - 0 - R63 [16]
Set the stereo location of the overdrive or distortion
sound. L63 is far left, 0 is center, and R63 is far
right.
OD Level 0 - 127 [17]
Adjust the volume of the overdrive or distortion
sound.
<RT (Rotary)>
RT L Slow (RT Low Frequency Slow Rate)
0.05 - 10.0 [6]
Adjust the speed of the low-range rotor for the low-
speed (Slow) setting.
RT L Fast (RT Low Frequency Fast Rate)
0.05 - 10.0 [7]
Adjust the speed of the low-range rotor for the high-
speed (Fast) setting.
RT Lo Accl (RT Low Frequency Acceleration)
0 - 15 [8]
Adjust the time over which the rotation speed of the
low-range rotor will change from low-speed to high-
speed (or high-speed to low-speed) rotation.
Smaller values will require greater time to reach the
new rotational speed.
RT Lo Lev (RT Low Frequency Level) 0 - 127 [9]
Adjust the volume of the low-range rotor.
L
R
Rotary
Overdrive/
Distortion
Pan
Pan
Chapter 4. Insertion Effects
87