Filter
Top Products
● Transmitting Individual Data
This data can be transmitted in one of three ways: Part parameters can be selected
from a menu and transmitted, parameters common to all Parts can be selected from a
menu and transmitted, or Insertion Effect parameters can be transmitted.
For the types of parameters which can be transmitted as Individual Data, refer to
p.150 “Parameter list and operations.”
* When selecting parameters common to all Parts from the menu, the following parameters can-
not be transmitted.
Device ID
MUTE Lock
EQ Lock
Rx GM On
Rx GS Reset
❍ Transmission procedure for Part parameters
❍ Transmission procedure for parameters common to all parts
1. Part parameters:
Press the [ALL] button to make the indicator dark.
Parameters common to all parts:
Press the [ALL] button to light the indicator.
2. Simultaneously press the PART [ll
ll
] and [rr
rr
] buttons.
3. Use [uu
uu
][dd
dd
] to select the parameter you wish to transmit.
While holding [SELECT], you can press [u][d] to jump parameters.
4. Part parameters:
Use PART[ll
ll
][rr
rr
] to select the Part which will transmit the parameter,
and use INSTRUMENT [ll
ll
][rr
rr
] to set the value.
Parameters common to all parts:
Use INSTRUMENT [ll
ll
][rr
rr
] to set the value.
5. Simultaneously press INSTRUMENT [ll
ll
] and [rr
rr
], and the data will be
transmitted.
A display of “Transmitting” will appear while the data is being transmitted.
* Be aware that the screen data will not be transmitted from MIDI OUT connector if MIDI
OUT/THRU Select (p.136) is set to THRU.
6. Simultaneously press PART [ll
ll
] and [rr
rr
] to end the procedure.
INSTRUMENTPAR T
LEVEL
PA N
REVERB
CHORUS
KEY SHIFT
MIDI CH
DELAY
ALL
MUTE
SC
-
55
MAP
SC
-
88
MAP
3
4
5
1
2
4
Parameters common to all Parts
6
Part Parameters
Chapter 5. Convenient functions
108