Roland SC-88 Pro Musical Instrument User Manual


 
Delay parameter function
* Delay cannot be used when Double Module Mode
(p.116) is selected.
Delay (Delay Type)
You can choose from 10 types of delay.
Delay1 Delay2 Delay3
These are conventional delays. 1, 2 and 3 have pro-
gressively longer delay times.
Delay4
This is a delay with a rather short delay time.
Pan Delay1 Pan Delay2 Pan Delay3
The delay sound moves between left and right. This is
effective when listening in stereo. 1, 2 and 3 have pro-
gressively longer delay times.
Pan Delay4
This is a rather short delay with the delayed sound
moving between left and right. It is effective when lis-
tening in stereo.
Delay to Reverb
Reverb is added to the delay sound which moves
between left and right. It is effective when listening in
stereo.
Panning Repeat
The delay sound moves between left and right, but the
pan positioning is different than the effects listed
above. It is effective when listening in stereo.
When you change the Delay Type, the following para-
meter values will automatically change. This is so that
the parameter values will have the settings most
appropriate for the selected Delay Type. You can
select these parameters (p.51) and modify the values
to adjust the effect to your taste.
Dly Pre-LPF (Delay Pre Low Pass Filter)
0 7
A low pass filter can be applied to the sound coming
into the delay to cut the high frequency range. Higher
values will cut more of the high frequencies, resulting
in a more mellow delay sound.
Dly Time C (Delay Time Center) 0.1ms
1.0s
The delay effect of this unit allows you to set three
delay times; center, left and right (when listening in
stereo). Delay Time Center sets the delay time of the
delay located at the center.
DlyTRatioL (Delay Time Ratio Left) 4%
500%
This parameter sets the delay time of the delay located
at the left as a percentage of the Delay Time Center.
(up to a max. of 1.0s)
DlyTRatioR (Delay Time Ratio Right) 4%
500%
This parameter sets the delay time of the delay located
at the right as a percentage of the Delay Time Center.
(up to a max. of 1.0s)
Dly Level C (Delay Level Center) 0 127
This parameter sets the volume of the central delay.
Higher values result in a louder center delay.
Dly Level L (Delay Level Left) 0 127
This parameter sets the volume of the left delay.
Higher values result in a louder left delay.
Dly Level R (Delay Level Right) 0 127
This parameter sets the volume of the right delay.
Higher values result in a louder right delay.
Dly Level (Delay Level) 0 127
This parameter sets the overall volume of the three
delays (center, left and right). Higher values result in a
louder overall delay.
Dly Fback (Delay Feedback) -64 0 +63
This parameter affects the number of times the delay
will repeat. With a value of 0, the delay will not repeat.
With higher values there will be more repeats. With
negative (-) values, the center delay will be fed back
with inverted phase. Negative values are effective with
short delay times.
Dly Rev (Delay Send Level To Reverb) 0
127
This parameter sets the amount of delay sound that is
sent to the reverb. Higher values result in more sound
being sent.
Chapter 3.System Effects
54