Filter
Top Products
■ Insertion effect settings
This unit has two types of effects: System effects and Insertion effects.
Insertion effects provide 64 effect types. Since appropriate parameters are provided for
each effects, you can make fine adjustments to the sound for professional-level control.
* For details on System effects and Insertion effects, and on the effect structure of this unit, refer
to p.46.
Insertion effects can be applied independently to an individual Part.
● Making Insertion effect settings
1. Use PART [ll
ll
][rr
rr
] to select the Part, and INSTRUMENT [ll
ll
][rr
rr
] to select
the Instrument to which the effect will be applied.
2. Press the [EFX] button to make the indicator light orange.
3. Press the [ON/OFF] button to make the Effect ON/OFF indicator light, and
the Insertion effect will be turned on.
To turn it off, press the [ON/OFF] button again.
4. Use EFX TYPE [ll
ll
][rr
rr
] to select the Effect Type.
5. Use EFX PARAM [ll
ll
][rr
rr
] to select parameters.
6. Use EFX VALUE [ll
ll
][rr
rr
] to set the value of the effect parameter.
7. While the [ALL] indicator is lit, press the [ON/OFF] button to turn off the
Effect ON/OFF indicator, and effects will be turned off for all Parts.
8. Press the [EFX] button to end the procedure.
Be aware that when you change the Effect Type, the effect parameters will be initialized.
If you wish to save your parameter values, it is convenient to use a User Effect. (p.99)
* It takes awhile until the sound can be heard after you change the Patch.
* If a monaural insertion effect is turned on, the settings for Part Pan (p. 25) and Master Pan (p.
34) will be ignored. Monaural insertion effects are those such as 2: Spectrum and 35: OD->
Chorus.
In the case of stereo insertion effects, however, the settings for Part Pan (p.25) and Master Pan
(p. 34) will be effective when the insertion effect is on. Stereo insertion effects are those that
maintain discrete L/R channels all the way to the output stage such as 1: Stereo-EQ and 16:
Hexa Chorus.
* If the Insertion effect is turned on for two or more Parts, the sound of each Part will be mixed.
It will not be possible to set reverb / chorus / delay / equalizer independently for these Parts. (p.46)
For example if the Insertion effect is turned on for Part1 and Part2, and you modify the Reverb
value for Part1, the Reverb for Part2 wil automatically be modified to the same value.
For Parts for which the Insertion effect is Off, settings can be made independently for each Part.
* When 00 Thru is selected, the Insertion effect will not be applied.
INSTRUMENTPART
LEVEL
PAN
REVERB
CHORUS
KEY SHIFT
MIDI CH
SELECT
EFX ON/OFF
USER
INST
VIB RATE
AT TACK
VIB DEPTH
CUTOFF
DECAY
VIB DELAY
RESONANCE
RELEASE
DELAY
EFX VALUEEFX PARAMEFX TYPE
ALL
MUTE
SC
-
55
MAP
SC
-
88
MAP
2
1
7
3
1
4
5
6
8
Chapter 4. Insertion Effects
56