Filter
Top Products
■ Recording all settings on a sequencer
This unit can transmit the contents of its sound source memory as MIDI data. The
data can be transmitted in two ways: Bulk Dump which transmits multiple parameters as
a group, and Individual Data which allows parameters to be transmitted individually. All
data is transmitted as System Exclusive messages.
Use Bulk Dump when you wish to save settings of this unit on a sequencer or person-
al computer. By transmitting a Bulk Dump, you can also set all parameters of two unit to
identical settings.
By transmitting Individual Data, you can create data without having to look up individ-
ual System Exclusive messages, letting you create data more efficiently.
● Bulk Dump procedure
1. Set the MIDI OUT/THRU (p.135) select switch to OUT.
2. Use a MIDI cable to connect this unit MIDI OUT/THRU connector to the
sequencer's MIDI IN connector.
3. Press [ALL] to make the button indicator light.
4. Simultaneously press both the INSTRUMENT [ll
ll
] [rr
rr
] buttons.
The display will ask “Dump ALL,Sure?”, and the data is now ready to be transmitted.
5. Use INSTRUMENT [ll
ll
] [rr
rr
] to select the type of data you wish to transmit.
All : all parameters of this unit (Including User parameters)
All-U : all parameters except User Parameter (User Instrument, User
Drum Set, User Effect and User Patch) settings
U.INST : User Instrument settings
U.DRUM : User Drum settings
U.Patch : User Patch settings
U.EFX : User Effect settings
GS A : GS parameters for Part group A
GS B : GS parameters for Part group B
6. Start the sequencer recording.
7. Press [ALL] and data transmission will begin.
The “Transmitting” display will appear while this unit transmits data.
To cancel data transmission, press [MUTE].
8. When data transmission is complete, stop recording on the sequencer.
* Since this operation transmits a large amount of data, make sure that the receiving MIDI device
has sufficient memory. If the receiving device has insufficient memory, recording will not be
completed. If you transmit data for all Parts, the bulk data transmitted by this unit is about 40
Kbytes.
INSTRUMENTPAR T
LEVEL
PA N
REVERB
CHORUS
KEY SHIFT
MIDI CH
DELAY
ALL
MUTE
SC
-
55
MAP
SC
-
88
MAP
3
4
5
7
Chapter 5. Convenient functions
107