Roland SC-88 Pro Musical Instrument User Manual


 
Creating a Drum Set (Drum Edit)
A Drum Part has assigned to it a group of various percussion instrument sounds
which are called a Drum Set. Unlike a Normal Part, a Drum Part sounds a different
instrument for each note number. Since a Drum Part needs to simultaneously produce a
wide variety of sounds such as bass drum, snare, tom and cymbal, this is very conve-
nient. A collection of such sounds each assigned to their own note number is called a
Drum Set. Each sound within a Drum Set is called an Drum Instrument. (Drum Set list
p.163)
On this unit, you can modify various drum instrument parameters to get the drum
sounds most suitable for your musical needs. A parameter is something that affects
the sound. The process of modifying parameter values is called editing.
For each instrument (Drum Instrument) of the currently selected Drum Set, you can
modify the values for the following parameters. These parameter values are set inde-
pendently for each Drum Instrument assigned to a note number.
Volume, Pan (stereo position), Pitch, Reverb send level, Chorus send level, Delay
send level, Assign group.
* Drum Sets you create can be stored in internal memory. (p.102)
* Settings between the Normal Part and the Drum Part are made in Part mode. (p.27)
Drum editing procedure
1. Make sure that the [ALL] indicator is dark.
If it is lit, press the [ALL] button to turn it off.
2. Use the PART [ll
ll
] [rr
rr
] buttons to select the Drum Part.
Drum Parts are indicated by an * mark at the left of the sound name.
3. Use the INSTRUMENT [ll
ll
] [rr
rr
] buttons to select a Drum Set.
If you press the [SC-55 MAP] button to make the indicator light, you can select the same
Drum Sets as in the SC-55/55mkII. SC-55/55mkII drum sets are indicated by a " mark
at the left of the Drum Set name. If you press the [SC-88 MAP] button to make the indi-
cator light, you can select the same Drum Sets as in the SC-88. SC-88 drum sets are
indicated by a
' mark at the left of the Drum Set name. Your editing will apply to the
Drum Set you select here.
4. Simultaneously press both the [SELECT] and EFX TYPE [ll
ll
] button.
The display will show the Part Group (p.23), the Part Mode (p.27), Drum Set number,
note name, and Drum Instrument name.
PART
INSTRUMENT
A10
100 0
LEVEL
PAN
026*TR-808
Drum set number
Drum set name
PART
INSTRUMENT
A01
100 0
LEVEL
PAN
026*"TR-808
Chapter 2. Parts and paramters
42