Filter
Top Products
4. Use the EFX PARAM [ll
ll
] [rr
rr
] buttons to adjust the EQ Gain(Low) or the
Low Frequency. Use the EFX VALUE [ll
ll
] [rr
rr
] buttons to adjust the EQ
Gain(High) or the High Frequency.
* The equalizer settings you make here are common to all Parts. They cannot be set indepen-
dently for individual Parts.
5. When you finish making settings, press [SELECT] once again to end the
procedure.
● Equalizer parameter functions
❍ EQ Gain (Low): -12 — 0 — +12dB
❍ EQ Gain (High): -12 — 0 — +12dB
Specify the amount of boost or cut (gain) for the high frequency range (high) and the
low frequency range (low). Positive (+) settings will boost, and negative (-) settings will
cut.
* With a Gain setting of 0, the equalizer will have no effect.
❍ EQ Low Freq (Equalizer Low Frequency): 200/400 Hz
❍ EQ High Freq (Equalizer High Frequency): 3/6 kHz
These parameters set the cutoff frequencies of the ranges boosted or cut by the
equalizer.
INSTRUMENTPART
LEVEL
PAN
REVERB
CHORUS
KEY SHIFT
MIDI CH
SELECT
EFX ON/OFF
USER
INST
VIB RATE
AT TACK
VIB DEPTH
CUTOFF
DECAY
VIB DELAY
RESONANCE
RELEASE
DELAY
EFX VALUEEFX PARAMEFX TYPE
ALL
MUTE
SC
-
55
MAP
SC
-
88
MAP
1
2
3
4
5
4
Chapter 3.System Effects
49