Filter
Top Products
Editing a Normal Voice
MOTIF XS Owner’s Manual
107
Voice mode
Song mode
Pattern mode
Mixing mode
Master mode
Utility mode
File mode
Performance
mode
Sampling
mode 1
Sampling
mode 2
Reference
to 0, and if the resultant Control Depth value is greater than
127 it will be set to 127.
Settings: 0 – 127
5 LFO Phase Offset
Determines the offset values of the Phase parameter in the
[SF1] Wave display for the respective Elements.
Settings: 0°, 90°, 120°, 180°, 240°, 270°
From this display you can create your own original LFO
wave. You can create a custom LFO wave consisting of up
to sixteen steps. The created LFO wave becomes available
when the Wave parameter in the Common LFO Wave
display is set to “user.”
1 Template
You can select a pre-programmed template for the LFO
wave.
Settings: all -64, all 0, all +63, saw up, saw down, even step, odd step
all -64
Values of all the steps are set to -64.
all 0
Values of all the steps are set to 0.
all +63
Values of all the steps are set to +63.
saw up
Creates a saw shaped upward wave.
saw down
Creates a saw shaped downward wave.
even step
Values of all odd steps are set to +63, and values of all even steps are
set to -64.
odd step
Values of all even steps are set to +63, and values of all odd steps are
set to -64.
n You can call up the list by pressing the [SF6] LIST button then
select the desired one from the list. For details, see page 82.
n You can use the [SF5] Random button to call up the base
wave at random. Each time you press the [SF5] Random
button, a different LFO wave appears on the display randomly.
2 Slope
Determines the slope or ramp characteristics of the LFO
wave.
Settings: off, up, down, up&down
off
Creates no slope.
up
Creates an upward slope.
down
Creates a downward slope.
up&down
Creates an upward then downward slope.
3 Cycle
Determines the amount of steps for creating the wave.
Settings: 2, 3, 4, 6, 8, 12, 16
4 Level 1 – 16
Determines the level for each step.
Settings: -64 – +63
Effect settings—[F6] Effect
Determines the Effect connection and values of other
parameters for the selected Voice. For details about the
structure in the Voice mode, see page 69.
This display gives you at-a-glance, overall view of the
effect routing and comprehensive control over the effects.
n Depending on the selected parameter, the LIST icon is shown
at the tab menu corresponding to the [SF6] button. In this
condition, you can call up the list by pressing the [SF6] LIST
button, then select the desired item from the list. For details,
see page 82.
Making your own LFO—[SF3] User
(Common LFO User)
0° 90°
120°
240°
180° 270°
Phase
Time
1
2
3
4
Effect Connection Settings—[SF1]
Connect
1
7
8
2
5
6
9
)
!
#
@
3
4