Filter
Top Products
Voice mode Song mode Pattern mode Mixing mode Master mode Utility mode File mode
Performance
mode
Sampling
mode 1
Sampling
mode 2
Reference
System Settings (Utility mode, etc.)
MOTIF XS Owner’s Manual
266
4 Output Select
Determines the output jack assignment for the Audio Input
Part.
Settings: See the table below.
n You can call up the list and select the desired item by pressing
the [SF6] LIST button. For details, see page 82.
5 Reverb Send
Determines the Send level of the Audio Input Part signal
sent to the Reverb effect. The higher the value, the more
pronounced the Reverb.
Settings: 0 – 127
6 Chorus Send
Determines the Send level of the Audio Input Part signal
sent to the Chorus effect. The higher the value, the more
pronounced the Chorus.
Settings: 0 – 127
7 Dry Level
Determines the level of the Audio Input Part which has not
been processed with the System Effects (Reverb, Chorus).
The higher the value, the less pronounced the Reverb and
Chorus.
Settings: 0 – 127
n The Reverb Send (5), Chorus Send (6), and Dry Level (7)
parameters are not available when Output Select (4) is set to
“insL.”
From this display you can set the Insertion Effect
connection of the Audio Input signal in the Voice mode.
This display is available only when entering the Utility
mode from the Voice mode.
1 INSERTION CONNECT (Insertion Connection)
Determines the effect routing for Insertion effects A and B.
The setting changes are shown on the diagram in the
display, giving you a clear picture of how the signal is
routed.
Settings: Ins A F B, Ins B F A
Ins A F B
Signals processed with Insertion Effect A will be sent to Insertion Effect
B and signals processed with Insertion Effect B are sent to Reverb and
Chorus.
Ins B F A
Signals processed with Insertion Effect B will be sent to Insertion Effect
A and signals processed with Insertion Effect A are sent to Reverb and
Chorus.
2 Insertion A (Insertion A Category/Type)*
3 Insertion B (Insertion B Category/Type)*
Determines the Effect type for Insertion A and B. From the
Category column, you can select one of the Effect
Categories, each of which contains similar Effect types.
From the Type column, you can select one of the Effect
Types listed in the selected Category.
Settings: Details about the Effect categories and types are described
on page 70.
n You can call up the list and select the desired item by pressing
the [SF6] LIST button. For details, see page 82.
LCD Output jacks Stereo/Mono
L&R OUTPUT L and R Stereo
asL&R ASSIGNABLE OUTPUT L and R Stereo
m1&2 mLAN OUTPUT 1 and 2 Stereo (1: L, 2: R)
m3&4 mLAN OUTPUT 3 and 4 Stereo (3: L, 4: R)
m5&6 mLAN OUTPUT 5 and 6 Stereo (5: L, 6: R)
m7&8 mLAN OUTPUT 7 and 8 Stereo (7: L, 8: R)
m9&10 mLAN OUTPUT 9 and 10 Stereo (9: L, 10: R)
m11&12 mLAN OUTPUT 11 and 12 Stereo (11: L, 12: R)
m13&14 mLAN OUTPUT 13 and 14 Stereo (13: L, 14: R)
asL ASSIGNABLE OUTPUT L Mono
asR ASSIGNABLE OUTPUT R Mono
m1 mLAN OUTPUT 1 Mono
:: :
m14 mLAN OUTPUT 14 Mono
ins L
(A/D Input
only)
Internal Vocoder module Mono
Insertion Effect Connection Settings—
[SF2] Connect
1
2
3