Filter
Top Products
Pattern Jobs
MOTIF XS Owner’s Manual
224
Voice mode Song mode Pattern mode Mixing mode Master mode Utility mode File mode
Performance
mode
Sampling
mode 1
Sampling
mode 2
Reference
Any previous data in the copy destination will be overwritten.
Undo/Redo cannot be used to undo/redo a Sample Voice copy
operation.
This Job exchanges or “swaps” the contents of two
specified Phrases. This is useful if you wish to exchange
two Phrases each of which is assigned to a different
Pattern.
1 Phrase to be exchanged
2 Phrase to be exchanged
Determines the Pattern number (01 – 64) and Phrase
number (001 – 256) to be exchanged respectively.
n If this Job is applied to Phrases which use Sample Voices, the
Sample Voices will not be exchanged.
This Job mixes all data from two selected user Phrases—1
and 2—and places the result in Phrase 2. This is useful if
you wish to create a new Phrase by mixing two Phrases
played, for example, by different drum instruments.
1 Original Phrase
2 Original Phrase and Destination Phrase
Determines the Pattern numbers (01 – 64) and Phrase
numbers (001 – 256) to be mixed respectively. Executing
the Job mixes all data from two selected user Phrases—1
and 2—and places the result in Phrase 2.
n Keep in mind that applying this Job to Phrases with Sample
Voices does not mix the Sample Voices.
This Job appends one Phrase (1) to the end of another
(2) to create one longer Phrase.
1 Original Phrase
2 Original Phrase and Destination Phrase
Determines the Pattern numbers (01 – 64) and Phrase
numbers (001 – 256) to be appended respectively.
Executing the Job appends one Phrase (1) to the end of
the Phrase (2).
n If this Job is applied to Phrases which use Sample Voices, the
Sample Voices of the source Phrase (1) will not be appended.
n If the Pattern length becomes greater than 256 measures as a
result of the this Job, an error message will be displayed and
the Job will be aborted.
This Job splits a selected Phrase (1) into two separate
Phrases (1 and 2). Phrase 1 is divided at the Split Point
(3).
1 Original Phrase
Determines the original Phrase to be split by selecting the
Pattern number (01 – 64) and Phrase number (001 – 256).
Executing the Job leaves the part before the Split Point (3)
of the original Phrase.
2 Destination Phrase
Determines the split destination Phrase by selecting the
Pattern number (off, 01 – 64) and Phrase number (off, 001 –
256). Executing the Job copies the part after the Split Point
to this split destination Phrase. When either the Pattern or
the Phrase is set to “off,” the part after the Split Point of the
original Phrase will be deleted.
02: Exchange Phrase
03: Mix Phrase
CAUTION
CAUTION
1
2
1
2
04: Append Phrase
05: Split Phrase
2
1
1
3
2