Filter
Top Products
Multi-timbral Tone Generator Settings for Song/Pattern Playback (Mixing mode)
MOTIF XS Owner’s Manual
237
Voice mode
Song mode
Pattern mode
Mixing mode
Master mode
Utility mode
File mode
Performance
mode
Sampling
mode 1
Sampling
mode 2
Reference
4 Initialize selected Parts to GM
When this box is checked, executing the Job resets the
selected Parts to standard GM tone generator settings.
When the checkbox of All Parameters (1) is marked, all
parameters will be reset to the GM settings. When the
checkbox of All Parameters (1) is not marked, checked
parameters (from Common, 1 – 16, AD and mLAN) will be
reset to the GM settings.
If you are editing a Song/Pattern Mixing program and
select a different Song/Pattern without storing the one
you’re editing, all the edits you’ve made will be erased. If
this happens, you can use Recall function to restore the
Mixing with your latest edits intact.
Copying parameter settings from another
Mixing (Copy Part)—[SF1] Part
This convenient operation lets you copy Common Edit and
Part Edit settings of a certain Mixing to the currently edited
Mixing. This is useful if you are creating a Mixing and wish
to use some parameter settings from another Mixing.
Source setup
1 In the Song mode: Song number
In the Pattern mode: Pattern number
Determines the source Mixing by selecting the Song
number (Pattern number while in the Pattern mode). The
name of the selected Song or Pattern is indicated at right.
To select the current Mixing as source, enter the
checkmark in the Current Mix checkbox.
2 Data type
Determines the source data type.
Settings: Common, Part1 – 16, A/D, mLAN
n The Insertion Effect Switch is a Part parameter. Therefore, the
Insertion Effect Switch parameter settings are copied only
when selecting one of the Parts 1 – 16.
Destination setup
3 Currently edited Part
Determines the destination Part of the currently edited Mixing.
Settings: Common, Part1 – 16, A/D, mLAN
Copying the Voice Common Edit settings to
the Mixing (Copy Voice)—[SF2] Voice
This Job lets you copy the Common Edit effect settings of
the Voice assigned to the specified Part to the current
Mixing. This would come in handy when a certain Voice
has effect settings that you want to use in your Mixing
program.
1 In the Song mode: Song number
In the Pattern mode: Pattern number, Section
Determines the Bank and the Mixing program number to
be copied. The name of the selected Song or Pattern is
indicated at right. If you wish to select the current Mixing as
source, enter the checkmark in the Current Mix check box.
2 Part number
Selects the Part (01 – 16) to which the source Voice is
assigned. The name of the selected Song or Pattern is
indicated at right.
3 Data type
Determines the source data type. By checking the
appropriate box, the corresponding data settings are
copied from the source Voice to the destination Mixing. The
other parameter settings are not copied from the Voice to
the current Mixing.
Copying the Performance Edit settings to the
Mixing Edit (Copy Performance)—[SF3] Perf
This Job lets you copy the settings of the Performance Edit
to the current Mixing. This would come in handy when a
certain Performance has settings that you want to use in
your Mixing program.
[F2] Recall
Copying parameter settings from another
Mixing, Voice and Performance—[F3] Copy
1
2
3
1
3
2
1
2
3