Filter
Top Products
Step 1: Setting Up
MOTIF XS Owner’s Manual
21
Start Guide
Listening to the Demo Song
Try listening to the preset Demo Songs, enjoy the high-
quality sound, and get a taste for how you can use the
MOTIF XS to create your own music.
••••••••••••••••••••••••••••••••••••
Playing the Demo Song
1
Press the [SONG] button to enter the Song
Play mode.
The Track View display of the Song Play mode appears.
2 Press the SEQ TRANSPORT [F] (Play) button
to start the Demo Song.
The Song currently shown on the display starts.
n To adjust the volume level of the Demo Songs, use the
MASTER VOLUME slider.
3 Press the SEQ TRANSPORT [J] (Stop) button
to stop the Demo Song.
••••••••••••••••••••••••••••••••••••
Selecting another Song
1
Make sure that the cursor is located on the
Song Number in the Track View display.
The highlighted frame within the display is called the
“cursor.” You can move the cursor up, down, left and
right by using the Cursor buttons. If the cursor is
located on another parameter, move the cursor to the
Song Number.
n Keep in mind that the example displays shown in this
manual are for instruction purposes only, and may appear
somewhat different from those on your instrument.
2 Press the [INC/YES] and [DEC/NO] buttons or
rotate the data dial to change the Demo Song
number.
n You can change the value of various parameters as well
as the Song number by using the [DEC/NO]/[INC/YES]
button or data dial after moving the cursor to the desired
location. This basic operation is used for all of the
selection and adjustment operations on the instrument.
••••••••••••••••••••••••••••••••••••
Loading the Demo data
In the default settings (when shipped from the factory),
several Demo Songs and Patterns are stored to the
instrument, starting at Song 01 and Pattern 01. However,
you may delete them by recording your original data or
loading a different Song/Pattern from an external USB
storage device. To restore the original Demo data, follow
the instructions below.
Loading the Demo data overwrites all the Songs or Patterns.
Before loading the Demo data, please check whether or not there
is important data in the Songs or Patterns. If there is important
data in the Songs or Patterns, save it to the external USB storage
device or a computer on the network before loading the Demo
data. For information about how to save, see page 278.
LOCATE 1 2
SEQ TRANSPORT
Stop button Play button
Song number Song name
DEC/NO
INC/YES
EXIT
EXECUTE
ENTER
DEC/NO
INC/YES
Decreases
number
Increases
number
Increases
number
Decreases
number
CAUTION