Filter
Top Products
Voice mode Song mode Pattern mode Mixing mode Master mode Utility mode File mode
Performance
mode
Sampling
mode 1
Sampling
mode 2
Reference
System Settings (Utility mode, etc.)
MOTIF XS Owner’s Manual
262
% [SF5] Password
Pressing this button calls up the Password display that lets
you set or change the password necessary for accessing
the MOTIF XS from an online device connected to the
network. When shipped from the factory, the password is
not set. Make sure to set the password if you wish to
access the MOTIF XS from an external computer via the
LAN network.
From this display, you can set the password of the MOTIF
XS. By using the password set here, external online
devices can access the File mode of the MOTIF XS.
1 Current Password
This column is provided for inputting the current password.
The password can be up to eight characters and no less
than five characters. For detailed instructions on inputting
characters, see page 82. “None” is shown when the
password is not set.
2 New Password
This column is provided for inputting the new password.
The password can be up to eight characters and no less
than five characters. For detailed instructions on inputting
characters, see page 82.
3 Confirm Password
This column is provided for inputting the new password
once again to confirm it. The password can be up to eight
characters and no less than five characters. For detailed
instructions on inputting characters, see page 82.
Password Setting
After inputting the Current Password, New Password and
Confirm Password (New Password), press the [ENTER]
button to set the New Password. If an error occurs, one of
the following error messages will be shown on the display.
Password is invalid.
The password you input to “Current Password” is wrong. Input
the correct password again.
Confirmed password is invalid.
The password you input to “Confirm Password” is not same as
the password you input to “New Password.”
Password is too short.
The password you input to “New Password” is too short. Input
the password again, using five or more characters.
n If you forget the current password, execute the Factory Set
Job (page 269) to reset the password setting, then input the
new password again.
From this display, you can specify certain automatic tasks
that the MOTIF XS will perform when power is turned on.
1 Auto Load
Determines whether the Auto Load function is on or off.
When this is on, the instrument will automatically load the
specified files (from the USB storage device) to User
memory—whenever the power is turned on. The file to be
loaded is shown on this display. The file to be loaded can
be specified via the [SF5] Get button.
Settings: on, off
2 Power On Mode
This determines the default power-on mode (and memory
bank)—letting you select which condition is automatically
called up when you turn the power on.
Settings:
performance
When turning the power on next time, the Performance Play mode is
entered and the first program number (USER: 001) is selected
automatically.
voice (USER1)
When turning the power on next time, the Voice Play mode is entered
and the first program number of User Voices (USR: 001) is selected
automatically.
voice (PRE1)
When turning the power on next time, the Voice Play mode is entered
and the first program number of Preset Voices (PRE: 001) is selected
automatically.
voice (GM)
When turning the power on next time, the Voice Play mode is entered
and the first program number of Preset GM Voices (GM: 001) is
selected automatically.
master
When turning the power on next time, the Master Play mode is entered
and the first program number (001) is selected automatically.
n Make sure to store the Utility settings to the internal memory by
pressing the [STORE] button before turning the power off.
Please keep in mind that the Utility settings will be lost if you
turn off the power without executing the Store operation.
Password Settings
[SF3] ➞ [SF5] Password
1
2
3
Setting the default display when
turning the power on—[SF4] Auto Load
1
2
3