Filter
Top Products
Editing a Performance
MOTIF XS Owner’s Manual
146
Voice mode Song mode Pattern mode Mixing mode Master mode Utility mode File mode
Performance
mode
Sampling
mode 1
Sampling
mode 2
Reference
n Depending on the selected parameter, the LIST icon is shown
at the tab menu corresponding to the [SF6] button. In this
condition, you can call up the list by pressing the [SF6] LIST
button, then select the desired item from the list. For details
see page 82.
1 Switch
Determines whether Master Effect is applied or not to the
selected Performance. You can turn it on or off by pressing
the [MASTER EFFECT] button on the front panel.
Settings: on, off
2 Type
Selects an Effect Type. Details about the Effect types are
described on page 70.
Settings: See the Effect Type list in the separate Data List booklet.
3 Preset
You can set various parameters in order to change how the
sound is affected by the selected Effect type. This
parameter lets you call up the pre-programmed settings of
these effect parameters.
4 Effect Parameters
The number of parameters and values available differs
depending on the currently selected effect type. Refer to
page 73 for details about the Effect parameters. Refer to
the separate Data List booklet for information on the
parameters for each Effect type.
From this display you can apply five-band equalization to
all Parts of the selected Performance.
1 Shape
Enables you to select one of two equalizer shapes:
shelving or peaking. This parameter is available for Low
and High.
Settings: shelv, peak
shelv (Shelving type)
This type of EQ shape lets you attenuate/boost the signal at
frequencies above or below the specified Frequency setting.
peak (Peaking type)
This type of EQ shape lets you attenuate/boost the signal at the
specified Frequency setting.
2 Frequency
Determines the center frequency. Frequencies around this
point are attenuated/boosted by the Gain setting below.
Settings:
Low
When the Shape is set to “shelv”: 32Hz – 2.0kHz
When the Shape is set to “peak”: 63Hz – 2.0kHz
Lo-Mid, Mid, Hi-Mid
100 Hz – 10.0 kHz
High
500 Hz – 16.0 kHz
3 Gain
Determines the level gain for the Frequency (set above), or
the amount the selected frequency band is attenuated or
boosted.
Settings: -12dB – +0dB – +12dB
Master Effect settings—[SF2] MasterFX
Master EQ settings—[SF3] MasterEQ
1
2
3
4
1
2
3
4
Low HighHi-MidMidLo-Mid
–
+
0
Gain
Q (frequency bandwidth)
5 bands
Frequency
–
+
0
–
+
0
Gain
EQ Low
Frequency
Gain
EQ High
Frequency
Frequency Frequency
–
+
0
Gain
Frequency
Frequency