Filter
Top Products
Song Job
MOTIF XS Owner’s Manual
201
Voice mode
Song mode
Pattern mode
Mixing mode
Master mode
Utility mode
File mode
Performance
mode
Sampling
mode 1
Sampling
mode 2
Reference
3 Direction
Determines the direction in which the data will be shifted.
Advance moves the data toward the beginning of the
sequence, while Delay shifts the data toward the end of the
sequence.
Settings: Advance, Delay
This Job copies all data from a specified source range to a
specified destination location.
1 Track and range
Determines the Song track (01 – 16, tempo, scene, all) and
range (Measure : Beat : Clock) over which the Job is
applied.
2 Number of Times
Determines the number of times the data is copied.
Settings: x 01 – x 99
3 Track and location
Determines the destination track (01 – 16, tempo, scene,
all) and range (Measure : Beat : Clock) of the destination.
When Copy Event is executed, any data already existing at the
Destination location will be overwritten.
This Job clears all specified events from the specified
range, effectively producing a segment of silence.
1 Track and range
Determines the Song track (01 – 16, tempo, scene, all) and
range (Measure : Beat : Clock) over which the Job is applied.
2 Event Type
Determines the event type to be erased. All events are
cleared when “all” is selected. Individual Control numbers
can be specified when erasing CC & Ch.Mode events.
Settings:
When Track is set to one of 01 – 16:
Note, Program Change, Pitch Bend, CC & Ch.Mode (Control Change
and Channel Mode Message)*, Ch After Touch (Channel Aftertouch),
Poly After Touch (Polyphonic Aftertouch), System Exclusive, all
* You can specify the Control Number (000-127, all).
When Track is set to “tempo”:
Tempo Change
When Track is set to “scene”:
Scene Memory, Track Mute
n You can call up the list and select the desired item by pressing
the [SF6] LIST button. For details, see page 82.
This Job moves all instances of specified event data from a
specified range of a track to the same range in a different
track.
1 Track and range
Determines the Song track (01 – 16) and range (Measure :
Beat : Clock) over which the Job is applied.
2 Event Type
Determines the event type to be extracted. Specific Note
Numbers and Control Numbers (of the Control Change and
Channel Mode message) can also be specified as
required.
Settings: Note*, Program Change, Pitch Bend, CC & Ch.Mode
(Control Change and Channel Mode Message)*, Ch After
Touch (Channel Aftertouch), Poly After Touch (Polyphonic
Aftertouch), System Exclusive
* You can specify the Note Number (C -2 – G8, all) and
Control Number (000 – 127, all) respectively.
n When the Event Type is set to “Note,” you can also set the Key
directly from the keyboard by holding down the [SF6] KBD
button and pressing the desired key.
3 Track
Determines the destination track (01 – 16).
The original data in the source range specified above will be
erased.
02: Copy Event
03: Erase Event
1
2
3
CAUTION
1
2
04: Extract Event
1
2
3
CAUTION