Filter
Top Products
Multi-timbral Tone Generator Settings for Song/Pattern Playback (Mixing mode)
MOTIF XS Owner’s Manual
238
Voice mode Song mode Pattern mode Mixing mode Master mode Utility mode File mode
Performance
mode
Sampling
mode 1
Sampling
mode 2
Reference
1 Bank, Performance number
Determines the Bank and the Performance number to be
copied. The name of the selected Performance is shown at
right.
2 Data type
Determines whether or not the settings of the listed
parameters are copied. By checking the box of the
Insertion Effect Switch, the Insertion Effect Switch settings
are copied from Performance Parts 1 – 4 to the Mixing
Parts set as Destination Parts (3). If the boxes of the other
parameters are checkmarked, the settings of the checked
parameters are copied from the Performance Common
mode to the Mixing Common mode. All other parameter
settings in the Common Edit and Part Edit modes will be
copied from the Performance to the current Mixing.
3 Destination Parts
Determines the four parts of the current Mixing as
destination.
Settings: 1 – 4, 5 – 8, 9 – 12, 13 – 16
This function lets you send specified parameter settings for
the currently edited Mixing to a computer or another MIDI
device for data archiving. To execute the Bulk Dump, press
the [ENTER] button.
n The Bulk Dump data includes only the MIDI messages and
does not include the Waveforms.
n In order to execute Bulk Dump, you’ll need to set the correct
MIDI Device Number. For details, see page 268.
Storing/Recalling the Mixing to/from the
Template—[SF1] Mix
This Job lets you store your edited Mixing program to User
memory as a Mixing Template and recall it. 32 Mixing
Templates can be stored. 32 Mixing Templates can be
used both in the Song mode and the Pattern mode.
1 Template
Determines the Mixing Template to be stored or recalled.
Pressing the [SF5] button to store the current Mixing while
pressing the [SF4] button to recall the Mixing Template
stored to User Memory.
Settings: 01 – 32
2 Mixing Template name
Enters the name of the Mixing Template. For detailed
instructions on naming, see page 82.
Copying the Performance Edit settings to a
Mixing (Template Performance)—[SF2] Perf
This Job lets you copy the settings of the Performance Edit
settings to the current Mixing. This would come in handy
when a certain Performance has settings that you want to
use in your Mixing program.
1 Bank, Performance number
Determines the Bank (USR 1 – 3) and the Performance
number (001 – 128) to be copied. The name of the
selected Performance is indicated at right.
n The difference between the Copy Performance and the
Template Performance is the MIDI receive channel set via the
Job execution. All the Mixing parts set via the Copy
Performance have the same MIDI channel whereas all the
Mixing parts set via the Template Performance have different
MIDI channels. This means that a Mixing setup created via the
Template Performance can be used as a multi-timbral tone
generator.
2 Destination Parts
Determines the four parts of the current MIxing as
destination.
Settings: 1 – 4, 5 – 8, 9 – 12, 13 – 16
Transmitting the Mixing Settings to an
external MIDI device (Bulk Dump)—[F4] Bulk
Mixing Template—[F5] Template
12
1
2