Filter
Top Products
System Settings (Utility mode, etc.)
MOTIF XS Owner’s Manual
267
Voice mode
Song mode
Pattern mode
Mixing mode
Master mode
Utility mode
File mode
Performance
mode
Sampling
mode 1
Sampling
mode 2
Reference
From these displays, you can set the Insertion Effect Types
applied to the Audio Input signal in the Voice mode. These
displays are available only when entering the Utility mode
from the Voice mode.
n Depending on the selected parameter, the LIST icon is shown
at the tab menu corresponding to the [SF6] button. In this
condition, you can call up the list by pressing the [SF6] LIST
button, then select the desired item from the list. For details,
see page 82.
1 Category
2 Type
From the Category column, you can select one of the Effect
Categories, each of which contains similar Effect types.
From the Type column, you can select one of the Effect
Types listed in the selected Category. Details about the
Effect categories are described on page 70.
3 Preset
This lets you call up pre-programmed settings for each
Effect Type, designed to be used for specific applications
and situations.
4 Effect Parameters
The number of parameters and values available differs
depending on the currently selected effect type. Refer to
page 73 for details about the Effect parameters. Refer to
the separate Data List booklet for information on the
parameters for each Effect type.
Remote Control and MIDI settings
—[F5] Control
From the following displays, you can set parameters
related to the Remote Control function and MIDI settings.
Lets you specify the DAW application software to be
controlled by the MOTIF XS. The MOTIF XS can control
Cubase 4, Logic Pro 7.2, SONAR 5.2 and Digital Performer
5.
1 DAW Type
Determines the DAW application software to be controlled
by the MOTIF XS.
Settings: Cubase, Logic, Sonar, Digital Performer
n When the [REMOTE ON/OFF] lamp is turned on, simply
selecting a DAW type calls up the Remote settings
automatically.
From this display, you can set the MIDI related parameters.
1 Basic Receive Ch
Determines the MIDI receive channel when this synthesizer
is set to single-timbre tone generator mode (Voice/
Performance modes).
Settings: 1 – 16, omni, off
omni
When this is selected, all channel messages are received.
n In the multi-timbral tone generator mode (Song/Pattern
modes), each Mixing Part receives MIDI data according to its
assigned MIDI receive channel. This can be set in the Voice
display (page 235) of the Mixing Part Edit mode.
Insertion Effect Type Settings—[SF3]
Ins A, [SF4] Ins B
1
2
3
4
DAW Settings—[SF1] Remote
MIDI Settings—[SF2] MIDI
1
1
2
3
5
6
7
8
9
4
)
!
@
#
$