Filter
Top Products
Headlight Switch
The headlight switch is located on the dash panel (Fig.
10) and is used to turn the headlights on and off.
Testing
1. Make sure ignition switch is off. Locate headlight
switch and unplug wire harness connector from switch.
2. The switch terminals are marked as shown in Figure
11. In the ON position, continuity should exist between
the two terminals. In the OFF position, there should be
no continuity between the switch terminals.
Figure 10
1
1. Headlight switch
3. Reconnect the harness connectors to the switch af-
ter testing.
BACK OF SWITCH
Figure 11
Multi Pro 5700–D
Page 5 – 9
Electrical System
Electrical
System