Filter
Top Products
Rev. D
Multi Pro 5700--D Page 6 -- 17 Spray System
IMPORTANT: Make sure to remove and neutralize
chemicals from tank and other components before
disassembly. Wearprotective clothing, chemical re-
sistant gloves, and eye protection during repair.
Disassembly (Fig. 14)
1. Park machine on a level surface, stop engine, en-
gage parking brake, and remove key from the ignition
switch.
2. Drain spray tank (see Operator’s Manual).
3. Label disconnected hoses for proper installation af-
ter repairs are completed.
4. Remove agitation nozzles as required using Figure
14as a guide.Discard allremoved O--rings andgaskets.
Assembly (Fig. 14)
NOTE: Coatall O--rings with vegetable oil before instal-
lation to reducethe chanceof damage duringassembly.
1. Install agitation nozzles using Figure 14 as a guide.
Replace all removed O--rings and gaskets.
2. Check spray system for leaks.
1. Agitation valve motor 2. Agitation supply hose
Figure 15
1
2
SERIAL NUMBER BELOW 310000000
1. Agitation valve motor 2. Agitation supply
Figure 16
1
2
SERIAL NUMBER ABOVE 310000000
Spray
System